We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS reducing sanitary tee with three hub connections

Value Brand

Value Brand Reducing Sanitary Tee 2 in x 1-1/2 in Hub x Hub x Hub Schedule 40

SKU CH-F74H-YJMWS

Reducing sanitary tee connects 2-inch and 1-1/2-inch ABS pipes with hub connections, meets ASTM D3965 cell class 32222, and handles temperatures from -40 to 180 degrees Fahrenheit

  • Reduces pipe diameter with 2 in to 1-1/2 in hub connections
  • ABS material handles -40 to 180 degrees F operating range
  • Schedule 40 rating meets ASTM D3965 cell class 32222
  • Hub x hub x hub design enables solvent-weld installation
  • Reducing sanitary tee shape directs flow in drainage systems

Reducing Sanitary Tee for ABS Drainage

This reducing sanitary tee connects three ABS pipe sections in a hub-by-hub arrangement. It is made to Schedule 40 dimensions and meets ASTM D3965 cell class 32222 for material quality. The fitting suits residential and light commercial drainage, waste and vent systems.

Suits Standard Hub Connections in DWV Layouts

Installers who need a 2-inch main line with 1-1/2-inch branch outlets will find this tee matches the required hub sizes. It is not intended for pressure piping, solvent-weld joints on non-ABS materials, or installations that demand a different schedule or cell class rating.

Fits Schedule 40 ABS Hub Networks

The tee slots into a Schedule 40 ABS hub network without adapters, letting the installer join pipes of the stated diameters directly. Its temperature rating of -40 to 180 degrees Fahrenheit covers typical DWV operating conditions, freeing the designer from specifying separate fittings for hot and cold waste lines.

Highlights

  • Reduces pipe diameter with 2 in to 1-1/2 in hub connections
  • ABS material handles -40 to 180 degrees F operating range
  • Schedule 40 rating meets ASTM D3965 cell class 32222
  • Hub x hub x hub design enables solvent-weld installation
  • Reducing sanitary tee shape directs flow in drainage systems

Specifications

BrandZORO SELECT

Questions about this item

What pipe sizes and hub connections must already be in place for this 2 in x 1-1/2 in Schedule 40 reducing sanitary tee to fit?

The tee joins a 2 in hub on the run with two 1-1/2 in hubs on the branch, so existing ABS piping must match those three hub diameters and Schedule 40 wall thickness.

Will the ABS material and Cell Class 32222 per ASTM D3965 work reliably alongside older ABS drain lines in the same system?

Yes, the fitting meets ASTM D3965 Cell Class 32222, meaning its material properties align with standard ABS pipe already installed in residential DWV systems.

How can I confirm the joint is sound after solvent-welding this reducing tee into the drainage line?

After the recommended cure time, run water through the system and inspect all three hub connections for leaks; the fitting is rated for continuous service up to 180 °F.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.