We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red brass tee fitting, quarter inch NPT threads, matte gold finish

Value Brand

Value Brand Red Brass Tee 1/4 in NPT 125 PSI 400°F

SKU CH-YPTS-AQAXR

Red brass tee with 1/4 in female NPT connections rated to 125 PSI and 400 °F

  • TypeOther
  • Red brass construction resists corrosion
  • 125 PSI rating handles moderate pressure systems
  • Withstands temperatures up to 400°F
  • 1/4 inch female NPT threads fit standard piping
  • Meets ASTM B584 and ASME B16.15 standards

Red Brass Tee 1/4 in NPT

This red brass tee connects three sections of pipe using 1/4 inch female NPT threads. It is rated for 125 PSI and a temperature range of -20 to 400 degrees F. The fitting suits residential and light commercial plumbing installations. It meets ASTM B584, ASME B 16.15 and ANSI B 1.20.1 standards.

Threaded NPT limits and compliance

The National Pipe Taper threads seal by interference and require proper thread sealant or tape for leak-free joints. Pressure rating applies at the stated temperature range; exceeding 400 degrees F reduces structural integrity. California Proposition 65 warnings apply because the alloy contains listed chemicals. The fitting is not certified for potable water systems.

Capacity and headroom for pipe runs

The 1/4 inch bore handles modest flow rates typical of branch lines and instrument connections. At 125 PSI the tee provides adequate margin for normal pressure fluctuations in hydronic or compressed air circuits. It runs out of capacity in high-volume mains or systems requiring larger diameter transitions. The fixed thread size prevents adaptation without additional fittings.

Highlights

  • Red brass construction resists corrosion
  • 125 PSI rating handles moderate pressure systems
  • Withstands temperatures up to 400°F
  • 1/4 inch female NPT threads fit standard piping
  • Meets ASTM B584 and ASME B16.15 standards

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

Should I choose a different pipe size or stick with the 1/4 in NPT version?

This tee is built for 1/4 in female NPT connections; select it only when your piping uses that exact size and thread standard.

What does the 125 PSI rating mean once the tee is installed in my system?

It indicates the maximum working pressure the red brass body can handle at temperatures up to 400 °F; do not exceed 125 PSI in service.

How does the NPT thread standard affect what I can connect to this tee?

The 1/4 in female NPT threads follow ANSI B1.20.1, so they mate with matching male NPT fittings and seal with thread engagement and sealant.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.