Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00920377BTC
In stock
Value Brand
Value Brand Red Brass Reducing Tee 3x3x2 FNPT
Red brass reducing tee connects 3 in, 3 in and 2 in FNPT pipes at up to 125 psi and -20 to 400 °F
- TypeOther
- Red brass construction resists corrosion in potable water systems
- Reducing 3 in x 3 in x 2 in FNPT connects different pipe sizes
- Class 125 rating handles up to 125 psi working pressure
- Operates from -20 °F to 400 °F for hot and cold lines
- Meets ANSI B1.20.1, ASME B16.15 and ASTM B584 standards
Red Brass Reducing Tee 3x3x2 FNPT
This Value Brand reducing tee connects three pipes at a single junction with a 3-inch by 3-inch by 2-inch configuration. It uses FNPT threading for secure installation in plumbing systems. The red brass construction meets ANSI B1.20.1, ASME B16.15, and ASTM B584 standards for material quality and dimensional accuracy.
For plumbing systems needing a durable branch
Installers joining a 2-inch branch to a 3-inch main line will find this tee suitable for water, oil, or gas service within the rated pressure and temperature limits. It is not intended for applications exceeding 125 psi or temperatures above 400 degrees Fahrenheit, nor for systems requiring different pipe sizes or connection types.
Handles 125 psi up to 400 degrees Fahrenheit
The Class 125 rating provides headroom for typical residential and commercial supply lines operating well below the maximum pressure. Performance drops off near the upper temperature limit of 400 degrees Fahrenheit or if system pressure approaches the 125 psi ceiling. California Proposition 65 warnings apply for chemical content.
Highlights
- Red brass construction resists corrosion in potable water systems
- Reducing 3 in x 3 in x 2 in FNPT connects different pipe sizes
- Class 125 rating handles up to 125 psi working pressure
- Operates from -20 °F to 400 °F for hot and cold lines
- Meets ANSI B1.20.1, ASME B16.15 and ASTM B584 standards
Specifications
| Brand | VALUE BRAND |
|---|---|
| Type | Other |
Questions about this item
What pipe sizes must I already have to connect this 3 in x 3 in x 2 in FNPT reducing tee?
You need 3 in FNPT female threads on the two straight ports and a 2 in FNPT female thread on the branch port.
Will this Class 125 red brass tee mate with older iron or steel fittings that follow ANSI B1.20.1 threading?
Yes, the FNPT threads conform to ANSI B1.20.1 so it will engage standard NPT male threads on legacy iron or steel pipe.
How can I verify the tee is holding pressure correctly after installation?
Pressurise the system up to 125 psi and inspect every joint for leaks; the fitting is rated for continuous service at that pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
