Value Brand
Value Brand Raised Panel Light Red 240 V AC
Red neon indicator light mounts in a 1/2 in hole and runs on 240 V AC with 2 mA draw
- Red neon indicator gives clear status at 240 V AC
- CSA and UL listed for code-compliant installations
- IP40 rating protects against solid objects over 1 mm
- 25,000-hour average life reduces replacement frequency
- 6-inch wire leads simplify panel wiring
Raised Panel Light 240 V AC
The Zoro Select 20C856 is a red raised panel indicator light designed for 240 V AC circuits. It features a nylon body with a polycarbonate lens and a stainless steel bezel in a round 1/2 inch mounting diameter. The unit draws 2 mA and offers an average life of 25,000 hours with NEMA 1 and IP40 ratings.
Suitable Applications
This indicator suits panels requiring a 1/2 inch cut-out within a thickness range of 0.030 in to 0.093 in. It meets CSA and UL listed standards for compliance needs. Buyers needing a different voltage, colour, or a higher environmental rating such as IP65 should look at alternative panel lights.
Installation Checks
Verify that the mounting hole diameter matches 1/2 inch and that panel thickness falls between the stated limits. Confirm the 240 V AC supply matches the fixture rating and that the 6 inch wire leads reach the termination point. Note the California Proposition 65 warning regarding chemicals known to cause cancer and reproductive harm.
Highlights
- Red neon indicator gives clear status at 240 V AC
- CSA and UL listed for code-compliant installations
- IP40 rating protects against solid objects over 1 mm
- 25,000-hour average life reduces replacement frequency
- 6-inch wire leads simplify panel wiring
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What electrical supply must be present for the 240 V AC raised panel light to operate?
The indicator requires a 240 V AC source; it draws 2 mA and is rated for continuous operation at that voltage.
How does the 1/2 in mounting diameter align with existing panel cut-outs?
The 1/2 in mounting diameter fits panels between .030 in and .093 in thick, matching common industrial cut-out sizes.
How can I verify the red neon is functioning correctly after wiring the 6 in leads?
Apply 240 V AC; the red neon should illuminate steadily, confirming the 2 mA draw and 25 000 hr rated life are active.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



