Value Brand
Value Brand Quarter Turn Hose Bibb 1/2 In M Brass 125 psi
Quarter-turn brass hose bibb with 1/2-inch male inlet, 125 psi rating and 180 °F maximum temperature
- TypeOther
- Quarter-turn handle provides quick on/off control
- Brass body withstands 125 psi working pressure
- Rated for temperatures up to 180 degrees F
- Meets ASME A112.18.1/CSA B125.1 plumbing standards
- Aluminum handle resists corrosion for long service life
Quarter-Turn Brass Hose Bibb
The Value Brand hose bibb is a brass quarter-turn valve with a 1/2 inch male inlet suitable for solder cup or MNPT connections. It is built for standard residential and light-commercial water supply points. The aluminum handle provides a simple on-off action. The body is rated for a maximum pressure of 125 psi and a maximum temperature of 180 Degrees F. Standards met include ANSI B1.20.1, ANSI B1.20.7, ANSI B16.18 and ASME A112.18.1/CSA B125.1.
Outdoor Faucet For Standard Supply
This bibb suits installers needing a code-compliant quarter-turn shut-off at a 1/2 inch supply line. It fits applications where a brass body and aluminum handle meet the required pressure and temperature limits. Buyers who need a different inlet size or thread type should look at other models. The product carries a California Proposition 65 warning for chemicals known to cause cancer and birth defects or other reproductive harm.
125 psi Brass Body Rating
The decisive specification is the 125 psi maximum pressure rating on the brass body. Verify that the supply system does not exceed this limit before installation. The valve also conforms to ANSI B1.20.1, ANSI B1.20.7, ANSI B16.18 and ASME A112.18.1/CSA B125.1 standards for dimensional and performance requirements.
Highlights
- Quarter-turn handle provides quick on/off control
- Brass body withstands 125 psi working pressure
- Rated for temperatures up to 180 degrees F
- Meets ASME A112.18.1/CSA B125.1 plumbing standards
- Aluminum handle resists corrosion for long service life
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
How do I verify the quarter-turn handle is sealing correctly at the rated 125 psi pressure?
Open the valve fully until the handle stops, then close it completely; the handle should move a quarter turn and water flow should stop instantly with no drips at the rated pressure.
What components are included and what must I supply for a solder-cup or 1/2 in MNPT installation?
The box contains the brass hose bibb with aluminum quarter-turn handle only; you must supply pipe, solder or thread sealant, and any required adapters for the chosen inlet type.
Which version should I choose if I need a standard quarter-turn brass bibb rated for 125 psi and 180 Degrees F?
This single model matches those specifications — brass body, quarter-turn aluminum handle, 125 psi maximum pressure, and 180 Degrees F maximum temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
