We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PTFE joint sealant tape roll 1/4 inch wide 50 feet long

Value Brand

Value Brand PTFE Joint Sealant 1/4 in x 50 ft White

SKU CH-DCQ0-Z44KC

White PTFE joint sealant tape, 1/4 inch wide by 50 feet long, rated for -400 °F to 600 °F and up to 3,000 psi

  • TypePackaging and Shipping Accessories
  • ColorWhite
  • Withstands extreme cold down to -400 °F
  • Handles intense heat up to 600 °F
  • Seals liquid lines at 3,000 psi pressure
  • Seals gas lines at 3,000 psi pressure
  • 50 ft roll covers many thread joints

PTFE Joint Sealant Tape

This PTFE joint sealant tape is a general-purpose thread sealing product supplied on a 50 ft roll. It suits maintenance engineers, plumbers and DIY users who need a reliable white tape for pipe connections up to 1 1/2 in diameter.

Thermals, Noise and Power Draw

The tape operates from -400 Degrees F to 600 Degrees F without degradation. It withstands 3,000 psi for both liquids and gases. No power is required and the material produces no noise during application or service.

Critical Specification — Linear Density

Linear density ranges from 1.2 g/cc to 1.5 g/cc, which determines how much material fills each thread. Buyers who need a different density range should select an alternative sealing product.

Highlights

  • Withstands extreme cold down to -400 °F
  • Handles intense heat up to 600 °F
  • Seals liquid lines at 3,000 psi pressure
  • Seals gas lines at 3,000 psi pressure
  • 50 ft roll covers many thread joints

Specifications

TypePackaging and Shipping Accessories
BrandZORO SELECT
ColorWhite

Questions about this item

How do I install the 1/4 in PTFE joint sealant on a 1 1/2 in thread, and what step is often missed?

Wrap the tape clockwise around clean male threads, overlapping each turn by half the 1/4 in width; the step often missed is leaving the first thread bare to prevent tape shredding into the system.

When will the PTFE sealant need replacement in a general-purpose thread sealing application?

Replace the sealant whenever the joint is disassembled, as the compressed 1.2 to 1.5 g/cc tape cannot be reused; routine inspection during maintenance cycles is recommended.

What limit appears first when the sealant is used continuously at high temperature and pressure?

The 600 Degrees F maximum operating temperature is reached before the 3,000 psi liquid or gas pressure rating under sustained combined loading.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.