We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small round pressure gauge with acrylic lens and black plastic case

Value Brand

Value Brand Pressure Gauge 0 to 60 psi 2 in Dial Acrylic

SKU CH-9E2B-EGNHR

Measures pressure up to 60 psi with a 2-inch acrylic dial and +/-3-2-3% accuracy

  • TypeElectronic
  • Measures up to 60 psi for common low-pressure tasks
  • +/-3-2-3% accuracy provides reliable readings for commercial use
  • 2-inch acrylic dial offers clear visibility in tight spaces
  • 1/4-inch NPT male center-back connection fits standard fittings
  • Bronze sensor and brass socket resist corrosion in demanding environments

Commercial Pressure Gauge 0 to 60 psi

This commercial pressure gauge measures from 0 to 60 psi with a 2 in dial and acrylic lens. It uses a bronze sensor and brass socket with a 1/4 in male NPT center back connection. The ABS plastic case is not panel-mountable. Accuracy follows a +/-3-2-3 percent grade across the scale.

Accuracy limits of the +/-3-2-3 grade

The +/-3-2-3 percent accuracy means the middle third of the range is tighter than the ends. Readings near 0 psi or 60 psi carry the wider tolerance band. The gauge has no IP or NEMA rating and no hazardous location rating. It is not intended for environments that demand sealed or certified instrumentation.

Installation notes and common issues

The 1/4 in male NPT center back thread screws directly into a matching female port. Sealant or tape on the brass threads prevents leaks. Over-tightening can crack the ABS case or strip the fitting. The acrylic lens can scratch if cleaned with abrasive materials. No panel-mount hardware is included.

Highlights

  • Measures up to 60 psi for common low-pressure tasks
  • +/-3-2-3% accuracy provides reliable readings for commercial use
  • 2-inch acrylic dial offers clear visibility in tight spaces
  • 1/4-inch NPT male center-back connection fits standard fittings
  • Bronze sensor and brass socket resist corrosion in demanding environments

Specifications

BrandZORO SELECT
TypeElectronic

Questions about this item

Should I choose the 0 to 60 psi version or a different pressure range?

Select the 0 to 60 psi model when your system operates within that span; the gauge covers the full scale from zero to 60 psi with a commercial-grade accuracy of ±3-2-3 % across the dial.

What does the ±3-2-3 % accuracy figure mean once the gauge is installed?

The reading may deviate by up to 3 % of full scale in the first and last quarters of the dial and 2 % in the middle half, so typical measurements stay within that tolerance band.

What does the 1/4 in NPT male connection limit in practice?

The 1/4 in NPT male centre-back fitting mates only with matching female NPT ports, restricting installation to panels or fittings that accept that thread size and orientation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.