We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel pipe nipple with threaded ends, 5 inches long

Value Brand

Value Brand Pipe Nipple Steel 3/8 NPT 5 in Schedule 40

SKU CH-4HJ3-FY7XG

Steel pipe nipple with male NPT threads at both ends for air, gases, non-potable water or oils

  • Schedule 40 steel withstands 300 psi at 150°F
  • Electric resistance weld ensures leak-free joints
  • 3/8 in NPT threads connect air, gas, oil lines
  • Black coating resists corrosion on non-potable systems
  • 5 in length fits standard piping layouts

Steel Pipe Nipple 3/8 NPT 5 in

This steel pipe nipple connects two female-threaded components in air, gas, non-potable water or oil lines. The 3/8 inch nominal size and five inch overall length suit tight routing between fixed ports. Welded construction and black coating provide mechanical strength and corrosion resistance for industrial or workshop plumbing.

Schedule 40 Pressure Limits

The fitting is rated for a maximum operating pressure of 300 psi at 150 degrees Fahrenheit. Steam service is limited to 150 psi at 350 degrees Fahrenheit. Exceeding these pressure or temperature boundaries risks joint failure and leakage in the threaded connections.

5 Inch Length and 300 psi Headroom

The five inch span bridges standard port spacing while the 300 psi rating covers most shop air and hydraulic circuits. It is not intended for potable water systems or pressures beyond the stated limits. Buyers needing longer reach or higher pressure ratings must select a different fitting.

Highlights

  • Schedule 40 steel withstands 300 psi at 150°F
  • Electric resistance weld ensures leak-free joints
  • 3/8 in NPT threads connect air, gas, oil lines
  • Black coating resists corrosion on non-potable systems
  • 5 in length fits standard piping layouts

Specifications

BrandZORO SELECT

Questions about this item

Which length of the 3/8-inch Schedule 40 steel pipe nipple should I choose?

This listing is for the 5-inch overall length version with 3/8-inch NPT male threads on both ends.

What does the 300 psi pressure rating mean when the nipple is installed in my system?

It indicates a maximum operating pressure of 300 psi at 150 degrees F for air, gases, non-potable water, and oils.

How does the NPT threading standard affect what I can connect to this fitting?

The 3/8-inch NPT male threads on both ends mate with standard female NPT fittings, sealing via thread taper.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.