We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two tan epoxy-coated steel pegboard panels, 24 by 24 inches, square holes, 300 lb capacity each

Value Brand

Value Brand Pegboard Panel 24x24in 2pk Tan Steel 300lb

SKU CH-TS5H-BC2DG

Two 24 by 24 inch epoxy-coated steel panels with square peg holes hold up to 300 pounds each for 600 pounds total capacity

  • 4 sq ft storage area from 24x24 in panels
  • 300 lb panel load capacity for heavy tools
  • 600 lb combined capacity across two panels
  • Square 9/32 in holes on 1-1/2 in spacing
  • Epoxy-coated steel resists corrosion in tan finish

Two-Panel Steel Pegboard Set

This two-panel set provides 4 square feet of storage area per panel in a 24 by 24 inch steel construction. Each panel supports up to 300 lb of load capacity with a combined 600 lb rating for the pair. The tan epoxy coating protects the steel surface from corrosion. Panels arrive unassembled for on-site installation.

Square-Hole Layout for Standard Hooks

The 9/32 inch square peg holes on 1 1/2 inch centres accept common square-peg hooks and accessories. Builders who need round-hole compatibility or a different hole spacing should look at other panel types. The single usable side suits wall mounting where only one face is accessible. Installers requiring double-sided panels will need an alternative product.

Epoxy-Coated Steel Under Continuous Load

The 1/2 inch deep steel panel distributes weight across the full surface when loaded to the 300 lb per panel limit. The epoxy finish resists chipping and rust during prolonged exposure to tools and humidity. Mounting hardware is not included, so the installer must supply fasteners rated for the intended sustained load.

Highlights

  • 4 sq ft storage area from 24x24 in panels
  • 300 lb panel load capacity for heavy tools
  • 600 lb combined capacity across two panels
  • Square 9/32 in holes on 1-1/2 in spacing
  • Epoxy-coated steel resists corrosion in tan finish

Specifications

BrandZoro Select

Questions about this item

Do I need to supply my own 9/32 in peg hooks for the square holes?

Yes, the panels include no hooks; you must provide 9/32 in pegboard hooks that fit the 1 1/2 in square-hole grid.

Will the 1/2 in thick steel panels sit flush against an existing 1/2 in pegboard backer?

Each panel is 1/2 in deep, so it will match the thickness of a standard 1/2 in backer and mount on the same furring strips.

How can I confirm the pair is holding the rated 600 lb evenly?

Load the panels gradually; if the tan epoxy-coated steel shows no bowing or fastener pull-through at the intended weight, the 600 lb capacity is being met.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.