Value Brand
Value Brand Pallet Cover Tarp 10.5 mil Black Silver 48 in 72 in
Heavy-duty 10.5 mil HDPE/LDPE tarp covers pallets measuring 48 by 72 inches
- TypeTarps
- 5 mil HDPE/LDPE blend resists tears and punctures
- 48 in by 72 in dimensions cover standard pallets completely
- Black and silver sides reflect heat and block UV light
- Suitable for indoor and outdoor storage applications
- Flat-pack configuration stores compactly until needed
Pallet Cover Tarp 10.5 mil
This Value Brand pallet cover tarp measures 48 inches wide by 72 inches deep and is built from high-density and low-density polyethylene at a 10.5 mil thickness. The black and silver colouring suits indoor or outdoor storage and transport tasks where a durable, flat-packed cover is required.
Thermal and power performance
The tarp is a passive cover with no electrical components, so it draws no power and produces no noise during use. Its polyethylene construction handles temperature variation in normal indoor or outdoor environments without active cooling or heating requirements.
Bundled accessories and software impact
The product ships as a single flat-packed tarp with no additional accessories, software or mounting hardware included. Buyers needing tie-downs, grommets or insulated liners must source those separately to complete their pallet protection setup.
Highlights
- 5 mil HDPE/LDPE blend resists tears and punctures
- 48 in by 72 in dimensions cover standard pallets completely
- Black and silver sides reflect heat and block UV light
- Suitable for indoor and outdoor storage applications
- Flat-pack configuration stores compactly until needed
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Tarps |
Questions about this item
How do you secure the 10.5 mil tarp over a 48 in by 72 in pallet?
Lay the cover flat over the load, pull the edges down evenly on all sides, then fasten with straps, bungee cords or shrink-wrap bands through the grommets; the step most people miss is tensioning each corner in sequence so wind cannot lift the centre.
What upkeep does the HDPE and LDPE material need after outdoor exposure?
Rinse dirt off with water, inspect grommets and seams for tears after each season, and patch small holes with polyethylene repair tape; UV degradation will eventually make the film brittle, so plan to replace the cover when it loses flexibility.
At what point does the 10.5 mil thickness limit performance in continuous sun?
Prolonged UV exposure causes the HDPE/LDPE blend to embrittle and tear at stress points first, typically after one to two summers of daily outdoor use, at which point the cover can no longer hold a pallet load securely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
