We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper compression lug, brown colour code, one 5/16 in stud hole

Value Brand

Value Brand One-Hole Compression Lug 2 AWG 5/16 in Stud Short 24C352

SKU CH-ETWW-S65GC

A single-hole copper compression lug for 2 AWG stranded wire with a 5/16 in stud, seamless barrel and inspection hole

  • TypeElectrical Connectors
  • Crimps 2 AWG copper with a seamless barrel
  • CSA certified and UL listed for 600 V AC service
  • Inspection hole confirms full conductor insertion
  • 5/16 in stud fits standard automotive terminals
  • Rated to 300 °F for high-temperature environments

Copper compression lug for 2 AWG wire

This one-hole lug accepts stranded copper conductors at 2 AWG and terminates them with a 5/16 inch stud hole. The short barrel and straight tongue keep the connection compact for tight panels. It is UL listed and CSA certified for 600 V AC service.

Seamless barrel rated to 300 °F

The seamless copper barrel is colour coded brown with die code 33 and includes an inspection hole to verify full insertion. Crimp termination creates a solid joint that runs cool at the rated 300 degrees F maximum operating temperature. No moving parts mean silent operation.

Single stud mount with straight tongue

The 0.59 inch tongue width fits standard 5/16 inch hardware for a secure bolt-down connection. One mounting hole simplifies alignment in crowded junction boxes. California Proposition 65 warnings apply for cancer and reproductive harm.

Highlights

  • Crimps 2 AWG copper with a seamless barrel
  • CSA certified and UL listed for 600 V AC service
  • Inspection hole confirms full conductor insertion
  • 5/16 in stud fits standard automotive terminals
  • Rated to 300 °F for high-temperature environments

Specifications

BrandZORO SELECT
TypeElectrical Connectors

Questions about this item

How do I crimp the 2 AWG copper wire into this lug without over-compressing the seamless barrel?

Use a crimp tool matched to die code 33, insert the stripped conductor until it is visible through the inspection hole, then apply a single firm compression; the seamless barrel and brown colour code confirm correct die alignment for 2 AWG copper.

Will the copper lug need anti-oxidant paste or periodic re-torquing after installation?

The seamless copper barrel and crimp termination create a gas-tight joint that does not require anti-oxidant paste or re-torquing; inspect the connection only if the 300 °F temperature rating or 600 V AC limit is approached in service.

At what point does the 600 V AC rating become the limiting factor during continuous load?

The 600 V AC maximum voltage is the first hard limit; sustained operation near this voltage combined with currents that push the connector toward its 300 °F temperature ceiling will trigger thermal derating before any mechanical failure occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.