Value Brand
Value Brand MIG Weld Wire E71T-1/1M .045 33 lb
Flux-core carbon-steel wire for FCAW welding, .045 in diameter on a 33 lb spool, AWS E71T-1/1M rated at 70,000-95,000 psi tensile strength
- TypeWelding Supplies
- Flux-core wire enables gasless welding for outdoor convenience
- Carbon-steel construction delivers 70 000-95 000 psi tensile strength
- E71T-1/1M classification meets AWS structural welding standards
- 045 in diameter suits medium-to-heavy fabrication tasks
- 33 lb spool supports extended production runs
AWS E71T-1/1M flux-core wire
Value Brand MIG Weld Wire is a carbon-steel, flux-cored electrode on a 33 lb spool. The .045 in diameter suits semi-automatic FCAW processes. AWS classification E71T-1/1M confirms tensile strength between 70,000 and 95,000 psi. California Proposition 65 warning applies.
For single-pass and multi-pass flat or horizontal
Fabricators running gasless or gas-shielded flux-core on structural steel will match the spec. Shops needing stainless, aluminium or metal-cored wire for out-of-position welds must choose a different consumable. The 33 lb spool also exceeds the capacity of many hobby-sized feeders.
The AWS E71T-1/1M classification decides fit
This code guarantees the mechanical properties and flux chemistry required for carbon-steel structural joints. Verify the WPS calls for E71T-1/1M before purchase; a different AWS number means the wire will not meet the engineering specification.
Highlights
- Flux-core wire enables gasless welding for outdoor convenience
- Carbon-steel construction delivers 70 000-95 000 psi tensile strength
- E71T-1/1M classification meets AWS structural welding standards
- 045 in diameter suits medium-to-heavy fabrication tasks
- 33 lb spool supports extended production runs
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Welding Supplies |
Questions about this item
What diameter wire feeder and flux-core capability must my welder have to run this .045 spool?
The wire is 0.045 in diameter and classified for flux-core FCAW welding, so your machine must accept that size and process.
Will the 33 lb spool fit on the spindle of my older MIG gun setup?
The wire comes on a standard 33 lb spool, which matches the common spindle size used on many existing MIG welders.
How can I verify the wire meets the E71T-1/1M spec after I start welding?
Check that the beads show the tensile strength range of 70,000 to 95,000 psi and that the AWS E71T-1/1M marking appears on the spool label.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
