Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00936138BTC
In stock
Value Brand
Value Brand Manual 3-Way Ball Valve 1/4 in Brass
Three-way brass ball valve with 1/4 in NPT female ports and PVC-coated steel handle
- TypeOther
- Manual 3-way flow control with brass body
- Female NPT connections on all three ports
- Standard port design for typical flow needs
- PVC-coated steel handle for grip and leverage
- California Proposition 65 chemical warning applies
Three-way brass ball valve
This quarter-inch brass valve directs flow through three female NPT ports using a manual handle. It suits plumbing, irrigation or light industrial systems that need simple flow diversion or mixing without actuation. The two-piece body is built from brass for corrosion resistance in water and compatible fluids. It is not intended for high-purity or sanitary processes that require certified surface finishes.
Thermal noise and power draw
The valve operates without electricity so it produces no heat, noise or power draw during use. Fluid temperature limits depend on the brass body and PVC-coated steel handle rather than an electrical rating. No external energy source is required for normal operation.
Included handle and compliance notes
A PVC-coated steel handle is supplied for manual lever operation and is fitted at the factory. The product carries California Proposition 65 warnings for chemicals linked to cancer and reproductive harm. No 3-A sanitary certification is claimed and average surface roughness is not rated.
Highlights
- Manual 3-way flow control with brass body
- Female NPT connections on all three ports
- Standard port design for typical flow needs
- PVC-coated steel handle for grip and leverage
- California Proposition 65 chemical warning applies
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
How do I install the 1/4 in NPT three-way ball valve and what step is often missed?
Thread the female NPT ports onto matching male pipe threads using PTFE tape or pipe sealant on the male threads only; the step often missed is tightening each joint just past hand-tight with a wrench on the valve body flats — not the handle — to avoid cracking the brass body.
What maintenance or replacement will the PVC-coated steel handle need over time?
The PVC grip can degrade from heat, UV exposure or chemical splashes; inspect it annually and replace the handle assembly if the coating cracks, becomes brittle or slips on the steel core.
What limit appears first when the brass valve runs continuously under pressure?
The standard-port brass ball and seals will reach their pressure-temperature rating before the PVC handle softens, so sustained high-temperature flow will cause seat leakage or body stress first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
