We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC two-way ball valve with tee handle

Value Brand

Value Brand Manual 2-Way Ball Valve Socket PVC 32H950

SKU CH-3W7S-J3YAV

PVC two-way ball valve handles water up to 150 psi with a full-port, one-piece body and FKM seals

  • TypeOther
  • PVC body resists corrosion for long service life
  • Full-port design maintains unrestricted water flow
  • PTFE seats and FKM seals ensure reliable shut-off
  • Tee handle provides easy manual operation
  • Rated to 150 psi for standard pressure systems

Valve Purpose and Build

This manual two-way ball valve is built for on-off control of water in residential or light-commercial plumbing. The one-piece PVC body with full-port PVC ball and PTFE seats delivers straight-through flow when open and positive shut-off when closed. A tee handle gives clear visual indication of valve position.

Installer Fit and Limits

Suits plumbers and maintenance teams needing a simple, corrosion-resistant shut-off for cold-water lines rated to 150 psi. Not suited for steam, combustible gas, high-purity processes requiring 3-A sanitary rating, or systems that demand a union-end or actuated valve for frequent cycling.

Deciding Specification

The valve carries a maximum operating pressure of 150 psi for water service, which is the single figure that determines whether it matches the design pressure of the piping system.

Highlights

  • PVC body resists corrosion for long service life
  • Full-port design maintains unrestricted water flow
  • PTFE seats and FKM seals ensure reliable shut-off
  • Tee handle provides easy manual operation
  • Rated to 150 psi for standard pressure systems

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

How do I solvent-weld this 1 in PVC socket valve without leaks?

Clean and prime both pipe and socket, apply cement evenly, insert fully with a quarter-turn, and hold until the joint sets; skipping the quarter-turn leaves unbonded gaps.

Which seals wear first on the FKM and PTFE seats?

The PTFE seats and FKM seals are the service items; replace them when the handle torque rises or seepage appears at the stem.

At what pressure does the 150 psi rating limit sustained water flow?

Continuous operation above 150 psi water pressure exceeds the valve's rated maximum and risks body or seal failure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.