We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC jet pump, 14-1/4 inch length, liquid operated

Value Brand

Value Brand Liquid Operated PVC Jet Pump 14-1/4 Length

SKU CH-H7ZF-S6TBW

Liquid-operated PVC jet pump with 1-1/2 inch NPT inlet and 2 inch NPT suction/discharge, 14-1/4 length, operating from -40 to 70 degrees F

  • Maintenance-free operation saves service time
  • Liquid-powered design eliminates need for electricity
  • PVC construction resists chemical corrosion
  • Operates from -40 to 70 degrees Fahrenheit
  • 14-1/4 inch length fits standard installations

Purpose and fit

This liquid operated jet pump is built for plumbing systems that need a maintenance-free solution. It suits installers working with standard NPT connections and a PVC body that resists corrosion. Buyers who require electric drive or a metal housing will need a different product. The 14-1/4 length fits typical pipe runs without extra fittings.

Thermals, noise and power

The pump has no motor, so it produces no electrical noise and draws no power from the supply. Operating temperature ranges from -40 to 70 degrees F, covering most ambient conditions. PVC construction does not transmit vibration the way metal casings can. California Proposition 65 warnings apply to chemicals in the material.

Sustained load behaviour

Because the unit is liquid operated, flow continues as long as the driving fluid is supplied at pressure. There is no thermal throttling or duty cycle limit from an electric motor. The PVC body maintains its shape across the full temperature range. Performance stays consistent during extended runs without overheating risk.

Highlights

  • Maintenance-free operation saves service time
  • Liquid-powered design eliminates need for electricity
  • PVC construction resists chemical corrosion
  • Operates from -40 to 70 degrees Fahrenheit
  • 14-1/4 inch length fits standard installations

Specifications

BrandZORO SELECT

Questions about this item

How do I install the 1-1/2 inch NPT inlet and 2 inch NPT suction/discharge connections correctly?

Wrap the male threads with PTFE tape or pipe-thread sealant, hand-tighten the PVC fittings into the pump ports, then finish with one to two turns using a strap wrench; avoid metal wrenches on the plastic body and do not over-tighten or the threads can crack.

What maintenance or replacement will this jet pump need over time?

The pump body is maintenance-free, but the PVC material can become brittle after repeated exposure to temperatures near the 70-degree upper limit or below -40 degrees; inspect the inlet and outlet threads annually and replace the unit if you see cracking or leakage.

What is the first limit reached during sustained operation?

Continuous running at liquid temperatures above 70 degrees Fahrenheit will degrade the PVC housing first, causing loss of structural integrity before any internal component fails.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.