Value Brand
Value Brand HSS-18 Roller Stand 16 in 28-45.5 in 500 lb
Adjustable roller stand supports material up to 500 lb, height 28 to 45.5 in, 16 in roller length
- Adjustable height from 28 to 45.5 inches matches your tool
- 500 lb capacity handles heavy workpieces safely
- 16 in galvanized steel roller feeds stock smoothly
- Four non-skid rubber feet keep the stand stable
- Wedge-lock pedestal support locks height securely
Portable Workshop Support
The Value Brand HSS-18 roller stand delivers a 16 inch long galvanised steel ball-bearing roller for smooth material feed. Adjustable height ranges from 28 to 45.5 inches to match bandsaw, planer or table saw tables. Four non-skid rubber leveling feet keep the unit stable on uneven floors. Wedge-lock pedestal design supports loads up to 500 pounds.
Build Integration
Place the stand at the outfeed or side of a stationary tool to support long boards or sheet goods during cuts. The 2 inch wide roller surface reduces friction so stock glides without binding. Leveling feet compensate for shop floor irregularities without shims. No power, brackets or permanent mounting are required.
Upgrade Path
Replaces fixed-height stands that force awkward working postures or lack sufficient load capacity. The adjustable range suits operators of different heights and accommodates multiple tool table heights. Buyers needing wider roller surfaces or powered conveyors will need a different solution.
Highlights
- Adjustable height from 28 to 45.5 inches matches your tool
- 500 lb capacity handles heavy workpieces safely
- 16 in galvanized steel roller feeds stock smoothly
- Four non-skid rubber feet keep the stand stable
- Wedge-lock pedestal support locks height securely
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
How much weight can the 16-inch roller surface hold before it bends?
The adjustable wedge-lock pedestal is rated for loads up to 500 pounds.
Does the stand vibrate or shift after hours of feeding stock through a table saw?
Four adjustable non-skid rubber leveling feet lock the base in place to prevent slipping during extended use.
What tools or hardware are needed to assemble and level the stand out of the box?
The height adjusts from 28 to 45.5 inches and the four rubber feet thread in by hand with no extra tools required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
