Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.0093491BTC
In stock
Value Brand
Value Brand Hex Bushing 1 in Male NPT X 1/2 in
Red-brass hex bushing connects 1-inch male NPT to 1/2-inch female NPT at 200 psi
- TypeOther
- Red brass construction resists corrosion
- Class 125 rating suits standard plumbing
- 200 psi maximum operating pressure handles demand
- 1 in male NPT to 1/2 in female threaded connection
- California Proposition 65 warning applies
Hex Bushing Red Brass 1 in Male NPT X 1/2 in
The Value Brand hex bushing connects a 1 in male NPT thread to a 1/2 in female NPT thread. It is made from red brass and rated for Class 125 service. This fitting suits plumbing repairs and new installations that require a straight reduction between those two pipe sizes.
Threaded Straight Reduction for Brass Piping
The bushing installs directly into a 1 in female NPT opening and accepts a 1/2 in male NPT pipe or adapter. Its straight, threaded design needs no solder, glue or special tools beyond standard pipe wrenches. The red brass construction resists dezincification in potable water systems.
Class 125 Rating Holds 200 psi Under Steady Pressure
The fitting maintains its 200 psi maximum operating pressure during continuous service, not only in short tests. Red brass threads resist galling and leakage over repeated thermal cycles. The product carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.
Highlights
- Red brass construction resists corrosion
- Class 125 rating suits standard plumbing
- 200 psi maximum operating pressure handles demand
- 1 in male NPT to 1/2 in female threaded connection
- California Proposition 65 warning applies
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
What is the maximum operating pressure this hex bushing can handle?
The hex bushing is rated for a maximum operating pressure of 200 psi.
Will the brass material generate heat or noise when installed in a pressurised line?
Brass fittings are passive components and do not generate heat or noise during normal operation.
Does this bushing require any special tools or sealants to make a leak-free connection?
Standard NPT threading requires thread sealant or tape, applied with a suitable wrench on the hex flats, to create a sealed joint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
