Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00948475BTC
In stock
Value Brand
Value Brand G-SSO-200V 2" FNPT Stainless Steel Ball Valve Inline
Two-piece stainless steel ball valve with full-port design handles air, steam and water up to 1000 psi operating pressure
- TypeOther
- Full-port design allows unrestricted flow
- 316 stainless steel body resists corrosion
- Locking handle prevents accidental operation
- Rated for 1000 psi operating pressure
- Suitable for air, steam and water media
Application and Media Compatibility
This two-inch full-port ball valve handles air, steam and water in inline piping systems. The 316 stainless-steel body and ball resist corrosion across those media. A two-piece straight body simplifies installation in new or existing lines. Locking handle prevents unintended actuation during operation.
Pressure Ratings and Vacuum Capability
Rated for 1000 psi maximum operating pressure and 150 psi steam service. Vacuum rating reaches 29.9 in Hg for suction or evacuation duties. Combustible-gas service is not rated, so the valve is not suited for fuel lines. California Proposition 65 warnings apply for cancer and reproductive-harm chemicals.
Sustained-Use Considerations
Full-port design maintains flow without restriction during continuous duty. Two-piece construction allows periodic inspection or seal replacement without removing the valve from the line. Locking handle secures position over long cycles. Not rated for 3-A sanitary standards, so it does not meet high-purity process requirements.
Highlights
- Full-port design allows unrestricted flow
- 316 stainless steel body resists corrosion
- Locking handle prevents accidental operation
- Rated for 1000 psi operating pressure
- Suitable for air, steam and water media
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
How do I install the 2" FNPT stainless steel ball valve inline, and what step do people often get wrong?
Apply PTFE tape or pipe dope to the male threads before threading the female FNPT ends onto the pipe; the common mistake is over-tightening past hand-tight plus one to two turns, which can crack the 316 stainless body or strip threads.
What maintenance or replacement will the 316 stainless steel ball valve need later?
Inspect the locking handle and stem packing annually for leaks; replace the PTFE seats and stem seals if drip appears at the full-port ball or handle base, especially after steam cycles at 150 psi.
What limit shows up first under sustained use of the 1,000 psi rated ball valve?
The 150 psi steam pressure rating is reached well before the 1,000 psi air/water limit, so steam service will hit its maximum allowable pressure first during prolonged high-temperature operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
