We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black rubber dock bumper with four bolt holes

Value Brand

Value Brand Dock Bumper 12x4-1/2x16 In. Rubber

SKU CH-SJTQ-YEN6C

A rectangular rubber dock bumper measuring 12 by 15 3/4 by 4 1/2 inches with four bolt-on mounting holes spaced 14 by 8 inches

  • Protects dock edges with 12 in. high rubber construction
  • Absorbs impact using 4-1/2 in. deep rectangular profile
  • Covers wide spans at 15-3/4 in. overall width
  • Secures firmly via four 13/16 in. mounting holes
  • Aligns easily with 14 in. horizontal and 8 in. vertical hole spacing

Dock Bumper 12x4-1/2x16 In.

This rectangular rubber dock bumper measures 12 inches high, 15 3/4 inches wide and 4 1/2 inches deep. It is designed for marine dock protection and bolts on using four mounting holes. The bumper face is 10 1/2 inches wide and 12 inches high with a 4 1/2 inch depth.

Sustained impact resistance

The solid rubber construction absorbs repeated vessel contact without permanent deformation. Mounting holes are spaced 14 inches on centre horizontally and 8 inches vertically with a 13/16 inch diameter for secure bolting. The bumper maintains its profile under continuous docking pressure.

Pre-installation checks

Verify your dock structure can accommodate the 15 3/4 inch overall width and 4 1/2 inch projection. Confirm the 14 inch by 8 inch hole pattern matches existing hardware or allows new drilling. Ensure the mounting surface is flat and rigid enough for the four-bolt pattern. Check local regulations for any material restrictions.

Highlights

  • Protects dock edges with 12 in. high rubber construction
  • Absorbs impact using 4-1/2 in. deep rectangular profile
  • Covers wide spans at 15-3/4 in. overall width
  • Secures firmly via four 13/16 in. mounting holes
  • Aligns easily with 14 in. horizontal and 8 in. vertical hole spacing

Specifications

BrandZORO SELECT

Questions about this item

Does the rubber bumper get hot or degrade when left in direct sun all day?

The bumper is solid rubber with no moving parts, so it produces no heat and its temperature simply follows the ambient conditions on the dock.

What mounting hardware must I already have to bolt this bumper in place?

You need four bolts that fit 13/16 in diameter holes spaced 14 in apart horizontally and 8 in apart vertically.

Will the 15 3/4 in overall width align with the pilings on my older wooden dock?

The four bolt holes are on 14 in by 8 in centres, so measure your existing pilings against that pattern before purchasing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.