Value Brand Dock Bumper 10x6x32 in Rubber 26W582

Dock Bumper For Marine Use

The Value Brand Dock Bumper 26W582 is a rectangular rubber fender designed to protect vessel hulls and dock structures during berthing. Its bolt-on mounting style suits permanent installations on commercial or recreational waterfronts. The unit measures 10 inches high by 6 inches deep with an overall width of 31 3/4 inches. This product contains chemicals known to the State of California to cause cancer and reproductive harm.

Installation And Fitment Notes

Four mounting holes with a 13/16 inch diameter accept standard bolts and are spaced 30 inches apart on centre horizontally and 6 inches vertically. The 26 1/2 inch bumper width sits inside the overall frame, so installers must verify that the mounting surface accommodates the full 31 3/4 inch span. No hardware is included, and the rubber material requires periodic inspection for UV degradation or impact damage.

Durability Under Continuous Exposure

The solid rubber construction absorbs repeated impacts without the rebound fatigue seen in pneumatic alternatives. Constant immersion, salt spray and temperature cycling will gradually harden the surface, reducing energy absorption over multiple seasons. The bolt-on pattern distributes shear loads evenly across the four fasteners, minimising local stress concentrations during sustained berthing pressure.