We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular dock bumper with steel face and rubber backing, bolt-on mounting

Value Brand

Value Brand Dock Bumper 10x5-1/4x16 In

SKU CH-P7JT-SD5BX

Laminated rubber-backed dock bumper with steel face measuring 10 by 5-1/4 by 16 inches, bolt-on mounting with four 7/8-inch holes on 14 by 6-inch centres

  • Laminated rubber backing absorbs heavy marine impacts
  • Steel face plate resists abrasion from dock contact
  • Bolt-on design with four 7/8 in mounting holes
  • Rectangular profile fits standard 10 in dock heights
  • California Proposition 65 chemical warning applies

Dock bumper dimensions

The laminated rubber backing and steel face dock bumper measures 10 inches high by 15 3/4 inches wide by 5 1/4 inches deep. It is designed for marine dock protection and mounts directly to the structure.

Bolt-on mounting pattern

Four mounting holes with a 7/8 inch diameter are spaced 14 inches apart on centre width and 6 inches apart on centre height. This fixed bolt-on pattern determines whether the bumper aligns with existing dock hardware.

Impact coverage and limits

The 10 1/2 inch bumper width and 5 1/4 inch depth provide a defined contact area for vessel fenders. It does not extend beyond these dimensions, so wider hulls or heavier impact zones may require additional bumpers.

Highlights

  • Laminated rubber backing absorbs heavy marine impacts
  • Steel face plate resists abrasion from dock contact
  • Bolt-on design with four 7/8 in mounting holes
  • Rectangular profile fits standard 10 in dock heights
  • California Proposition 65 chemical warning applies

Specifications

BrandZORO SELECT

Questions about this item

How much wall coverage does the 15 3/4 in width give once the bumper is bolted on?

The bumper spans 15 3/4 inches across the dock face, so a single unit protects that full horizontal stretch between its outer edges.

What does the 7/8 in mounting hole diameter mean for the bolts I must supply?

You need bolts with a shank that fits a 7/8 inch clearance hole; the four holes are spaced 14 inches apart width-wise and 6 inches apart height-wise.

Will the 5 1/4 in depth clear a standard dock stringer when bolted flat?

The bumper projects 5 1/4 inches from the mounting surface, so measure your stringer thickness to confirm the face sits proud of the timber.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.