We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular rubber dock bumper with two bolt holes

Value Brand

Value Brand Dock Bumper 10x4-1/2x11-1/2 in Rubber

SKU CH-WQEE-PK7AQ

A rectangular rubber dock bumper measuring 10 inches high by 11-1/2 inches wide with two bolt-on mounting holes

  • Protects vessels with durable rubber construction
  • Rectangular 10 by 11-1/2 inch profile absorbs impact
  • Bolt-on mounting uses two 13/16 inch holes
  • Pre-drilled holes spaced 6 inches on centre
  • California Proposition 65 chemical warning applies

Dock Bumper Dimensions

This rectangular rubber bumper measures 10 inches high by 11 1/2 inches wide with a 4 1/2 inch depth. It mounts using two bolt holes of 13/16 inch diameter spaced 6 inches on centre.

Marine Dock Protection

Suits dock owners needing a bolt-on buffer for pilings or seawalls against vessel impact. Not intended for buyers who require curved profiles, integrated lighting or non-rubber materials.

Impact Capacity Headroom

The solid rubber construction absorbs repeated contact from small to mid-size craft during docking manoeuvres. It reaches its limit under sustained heavy commercial traffic or extreme tidal surge loads.

Highlights

  • Protects vessels with durable rubber construction
  • Rectangular 10 by 11-1/2 inch profile absorbs impact
  • Bolt-on mounting uses two 13/16 inch holes
  • Pre-drilled holes spaced 6 inches on centre
  • California Proposition 65 chemical warning applies

Specifications

BrandZORO SELECT

Questions about this item

What mounting hardware do I need to secure the 13/16 in holes on this bumper?

You will need bolts or lag screws that fit a 13/16 in diameter hole, plus washers and nuts rated for marine use.

Will the 6 in centre-to-centre hole spacing match the brackets on my existing dock?

Measure your current bracket hole centres; if they are 6 in apart the bumper will bolt straight on, otherwise you must drill new holes.

How can I confirm the bumper is seated correctly after installation?

Check that the 10 in height, 11 1/2 in width and 4 1/2 in depth sit flush against the dock face and that both bolts are tight.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.