We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black corrugated polyethylene tubing coil 1/4 inch nominal size 100 foot length

Value Brand

Value Brand Corrugated Tubing 1/4 in 100 ft

SKU CH-159V-7NA1K

Black polyethylene corrugated tubing, 1/4 in nominal size with 0.27 in inside diameter and 100 ft length for cable protection

  • TypeCable Management & Conduit
  • Protects wires from abrasion with split corrugated design
  • Operates reliably from 30 to 175 degrees F
  • Resists chemicals for harsh environment durability
  • Self-extinguishing material adds fire safety
  • 100 ft length covers long cable runs

1/4 in corrugated polyethylene tubing

This 100 ft roll of 1/4 in nominal corrugated polyethylene tubing provides flexible cable protection for wiring harnesses and general industrial use. The split design allows easy installation over existing cables without disconnection. It operates from 30 °F to 175 °F and is self-extinguishing for added safety.

Installers needing split loom for moderate heat

The tubing suits automotive, marine and control-panel work where abrasion resistance and chemical resistance are required. It is not rated for outdoor use or hazardous locations, so installers needing UV-stable or explosion-proof conduit should select a different product.

100 ft length with 0.27 in inside diameter

The 0.27 in bore accommodates typical wire bundles up to that size while the 0.39 in outside diameter fits standard routing channels. Dynamic bend radius is 0.36 in and static bend radius is 0.43 in, so tighter bends risk kinking. Wall thickness of 0.02 in gives normal abrasion protection but limited crush resistance.

Highlights

  • Protects wires from abrasion with split corrugated design
  • Operates reliably from 30 to 175 degrees F
  • Resists chemicals for harsh environment durability
  • Self-extinguishing material adds fire safety
  • 100 ft length covers long cable runs

Specifications

BrandZORO SELECT
TypeCable Management & Conduit

Questions about this item

What minimum bend radius should I plan for when routing this 1/4 in tubing around tight corners?

Allow at least 0.36 in for dynamic bends and 0.43 in for static bends so the polyethylene wall does not kink or flatten.

Will the tubing become brittle if the engine bay drops to 30 °F?

The polyethylene is rated for a minimum operating temperature of 30 °F, so it remains flexible down to that point.

How can I confirm the split seam stays closed after I push the wires through?

Run your fingers along the full 100 ft length; the self-extinguishing polyethylene should snap back and hold the cables without gaps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.