Value Brand Commercial Pressure Gauge 0 to 60 psi 3 1/2 in Dial 1/4 in

Commercial pressure gauge 0 to 60 psi

This Value Brand gauge measures pressure from 0 to 60 psi on a 3 1/2 inch dial with a 1/4 inch NPT male connection. It suits technicians who need a direct-mount instrument for air, water or oil lines in commercial plant rooms or light industrial equipment. The 304 stainless steel case resists corrosion in humid or wash-down environments.

Accuracy and mounting limits

Accuracy follows a 3-2-3 percent pattern across the scale, so readings near the centre are tighter than those at the extremes. The centre-back connection requires clearance behind the panel, and the acrylic lens cannot withstand high heat or aggressive solvents. No liquid fill is present, so vibration damping relies on the dry mechanism alone. The gauge carries no IP or NEMA rating, restricting it to indoor or sheltered use.

California Proposition 65 notice

This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Buyers who must avoid listed substances for regulatory or safety programmes should select an alternative gauge.