We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel commercial pressure gauge 2 1/2 inch dial center back connection

Value Brand

Value Brand Commercial Pressure Gauge 0 to 300 psi 2 1/2 in Dial 1/4 in NPT Center Back

SKU CH-93K5-XNT6Q

Measures pressure up to 300 psi with a 2 1/2 inch dial and 1/4 inch NPT center back connection

  • TypeElectronic
  • +/-3-2-3% accuracy ensures reliable readings
  • 304 stainless steel case resists corrosion
  • 316 stainless steel sensor and socket suit harsh media
  • 2 1/2 in dial with acrylic lens for clear visibility
  • 1/4 in NPT center back connection simplifies installation

Commercial Pressure Gauge 0 to 300 psi

This commercial pressure gauge measures from zero to three hundred psi. It features a two and a half inch dial with an acrylic lens. The case and sensor are made from 304 and 316 stainless steel respectively. A quarter inch male NPT connection is located at the centre back.

Suited for general monitoring and industrial use

Operators who need a straightforward panel reading for water, air or oil lines will find this gauge practical. It is not rated for hazardous locations and carries no IP or NEMA classification. Buyers who require a certified safety rating or a panel-mountable flange should look at a different model.

Connects via quarter inch NPT centre back

The male NPT thread screws directly into a matching female port without extra adapters. Because the connection sits at the centre back, the gauge sits close to the mounting surface. No panel cut-out or bracket is included, so the installer must provide a suitable fitting or manifold.

Highlights

  • +/-3-2-3% accuracy ensures reliable readings
  • 304 stainless steel case resists corrosion
  • 316 stainless steel sensor and socket suit harsh media
  • 2 1/2 in dial with acrylic lens for clear visibility
  • 1/4 in NPT center back connection simplifies installation

Specifications

BrandVALUE BRAND
TypeElectronic

Questions about this item

Does my system need a 1/4 in NPT female port to install this gauge?

Yes, the gauge has a 1/4 in male NPT connection on the center back, so the mounting point must provide a matching female NPT thread.

Can I keep my existing 304 stainless steel panel and mount this gauge directly?

The case is 304 stainless steel and the sensor is 316 stainless steel, so the materials are compatible, but the gauge is not panel-mountable and requires a threaded process connection instead.

After fitting the gauge, how do I confirm the +/-3-2-3 percent accuracy is being met?

Apply a known reference pressure at zero, mid-scale and full-scale points, then compare the 2 1/2 in dial reading to the reference; the deviation should stay within the stated accuracy grade.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.