We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ring flange gasket PTFE stainless steel 5 inch pipe ANSI 150 class 3/32 thick 7 3/4 outside diameter 5 9/16 inside diameter

Value Brand

Value Brand Cars & Trucks vehicle White

SKU CH-26K5-FVHS1

A PTFE ring flange gasket with 304 stainless steel insert fits 5-inch ANSI Class 150 flanges and withstands -250 to 500 degrees F

  • TypeCars & Trucks
  • ColorWhite
  • Color MappingWhite
  • PTFE material handles 500 °F maximum temperature
  • 304 stainless steel insert resists corrosion at -250 °F
  • ANSI Class 150 rating fits 5 inch pipe systems
  • 3/32 inch thickness provides reliable sealing performance
  • White PTFE construction enables visual inspection of gasket condition

Industrial flange gasket for 5-inch piping

This ring gasket fits ANSI Class 150 flanges with a 5-inch nominal pipe size. The PTFE sealing face is reinforced by a 304 stainless-steel insert for chemical resistance and dimensional stability. It suits process lines that require a clean white gasket with no binder or filler material.

Wide temperature range with minimal creep

PTFE construction remains flexible from minus 250 degrees F up to 500 degrees F without hardening or cold-flowing. The 3/32-inch thickness provides adequate compression at standard bolt loads while limiting extrusion. No metal-detectable or X-ray-detectable additives are present, keeping the seal chemically pure.

Drop-in replacement with no extra hardware

The gasket ships as a single ring measuring 5 9/16 inches inside diameter and 7 3/4 inches outside diameter. No fasteners or mounting hardware are included, so installers reuse existing bolts and follow standard torque procedures. Buyers who need integrated bolt holes or a full-face profile must select a different gasket style.

Highlights

  • PTFE material handles 500 °F maximum temperature
  • 304 stainless steel insert resists corrosion at -250 °F
  • ANSI Class 150 rating fits 5 inch pipe systems
  • 3/32 inch thickness provides reliable sealing performance
  • White PTFE construction enables visual inspection of gasket condition

Specifications

BrandZORO SELECT
TypeCars & Trucks
ColorWhite
Color MappingWhite

Questions about this item

How do I install the 5 in PTFE flange gasket on an ANSI Class 150 flange, and what step is often missed?

Center the 5 9/16 in inside diameter on the flange face, align bolt holes, and torque bolts in a star pattern; the step often missed is cleaning both faces so no grit cuts the 3/32 in PTFE.

What maintenance or replacement will the PTFE ring gasket need later?

Inspect the white PTFE ring for cold-flow creep or chemical attack after each thermal cycle between -250 and 500 °F; replace the gasket if the 304 stainless steel insert shows corrosion or the PTFE thickness has extruded.

What limit appears first under sustained use at the 500 °F maximum operating temperature?

PTFE cold-flow extrusion under bolt load is the first limit; the 3/32 in thickness can thin, reducing seal stress on the ANSI Class 150 flange before the 304 stainless steel insert reaches any thermal limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.