We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Value Brand

Value Brand Carbon Steel Hardware Cloth 50 ft 36 in

SKU CH-6A6W-JE4XQ

Galvanised carbon-steel hardware cloth, 50 ft by 36 in, with 1/2 in welded mesh and 85 % open area

  • TypeTools
  • Galvanized coating resists rust for long outdoor life
  • 1/2 x 1/2 inch welded mesh keeps small animals out
  • 50 foot roll covers large garden or fence projects
  • 36 inch width fits standard hardware cloth frames
  • 85 percent open area allows light and air flow

Carbon Steel Hardware Cloth 50 ft Roll

ZORO SELECT carbon steel hardware cloth comes in a 50 ft length by 36 in width. The welded mesh uses 0.04 in diameter wire with a 0.46 in opening size and 85 percent open area. Galvanized coating provides a gray finish suitable for outdoor exposure.

Suits garden fencing, small animal enclosures

Builders needing a solid privacy screen or heavy-duty security barrier should look at something else. The half-inch mesh does not block fine debris or prevent climbing by determined pests. Buyers who want a different mesh gauge, a vinyl coating or a shorter pre-cut panel will need another product.

1/2 x 1/2 in welded mesh with 0.46 in openings

This mesh size determines what passes through and what stays out. The 0.04 in wire diameter and galvanized finish define the strength and corrosion resistance for the intended application.

Highlights

  • Galvanized coating resists rust for long outdoor life
  • 1/2 x 1/2 inch welded mesh keeps small animals out
  • 50 foot roll covers large garden or fence projects
  • 36 inch width fits standard hardware cloth frames
  • 85 percent open area allows light and air flow

Specifications

TypeTools
BrandZORO SELECT

Questions about this item

What post spacing works with the 36 in width and 1/2 x 1/2 mesh?

Posts set on 4 ft centres match the 50 ft roll length and keep the 36 in panel flat without mid-span sag.

How do you fasten the 0.04 in galvanized wire without tearing the zinc coating?

Use 1 in galvanized poultry staples driven at a slight angle; hammer straight staples and they crush the 0.46 in openings.

When does the galvanized coating need touch-up on the 0.04 in wire?

Inspect yearly; brush rust spots with cold-galvanizing compound where the 85 % open area lets moisture reach the carbon steel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.