We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Value Brand

Value Brand Carbon Steel Hardware Cloth 100 ft x 36 in

SKU CH-N6NP-C52CY

Galvanized carbon steel hardware cloth, 100 ft by 36 in, 1/8 in mesh with 75 % open area

  • TypeTools
  • 100-foot roll covers large areas
  • 36-inch width suits tall enclosures
  • 1/8-inch mesh keeps out small pests
  • 75 percent open area allows airflow
  • Galvanized carbon steel resists corrosion

100 ft x 36 in Carbon Steel Cloth

This roll of galvanized carbon steel hardware cloth measures 100 feet long and 36 inches wide. The plain weave pattern creates a uniform mesh with a 75 percent open area. It is suited to screening, guarding and containment tasks that require a rigid metal fabric.

Replaces worn mesh and lightweight screening

The 1/8 inch by 1/8 inch mesh size with a 0.109 inch opening blocks rodents and debris while allowing air and light to pass. Upgrade from plastic netting or corroded wire when a durable, galvanized steel barrier is needed for vents, soffits or garden enclosures.

Holds shape under tension and weather

The 0.0164 inch diameter wire maintains structural integrity when stretched across frames or buried as a barrier. Galvanized coating resists rust during prolonged outdoor exposure, and the plain weave distributes load evenly across the roll without sagging.

Highlights

  • 100-foot roll covers large areas
  • 36-inch width suits tall enclosures
  • 1/8-inch mesh keeps out small pests
  • 75 percent open area allows airflow
  • Galvanized carbon steel resists corrosion

Specifications

TypeTools
BrandZORO SELECT

Questions about this item

How much space does the 36 in wide roll need for storage or mounting?

The roll measures 36 inches wide by 100 feet long, so allow at least that footprint plus room to unroll and cut sections.

What tools and steps are required to install the galvanized carbon steel cloth, and where do installers go wrong?

Cut the woven mesh with heavy-duty snips, then fasten using staples, zip ties or wire; the common error is leaving cut edges unsecured, which lets the 0.0164 in wire spring back.

When will the galvanized coating need attention or the mesh need replacing?

The galvanized finish resists rust, but inspect annually; replace sections once white rust appears or the 0.109 in openings deform from impact.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.