We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium cam-and-groove Type C coupler, 2 in hose shank, locking arm visible

Value Brand

Value Brand Cam and Groove Coupler Type C 2 in

SKU CH-1J52-YS2J2

Aluminium Type C cam-and-groove coupler with nitrile gasket, locking arm and 250 psi rating at 70 °F

  • Aluminium body resists corrosion for long service life
  • Type C design mates securely with male hose shank
  • 250 psi working pressure handles demanding fluid transfer
  • Nitrile gasket provides reliable seal across temperature range
  • Locking arm included for quick, tool-free connection

Cam and Groove Coupler Type C 2 in

This aluminium Type C cam and groove coupler accepts a 2 in hose shank for direct hose connection. The socket inside diameter measures 2 1/2 in and the overall length is 5 27/64 in. A nitrile gasket and integrated locking arm complete the assembly.

Upgrade from worn or leaking couplers

Replace an existing fitting when the gasket has degraded or the locking mechanism no longer engages securely. The 250 psi maximum working pressure at 70 F rating supports the same service demands as the original component.

Sustained pressure performance

The aluminium body and nitrile gasket maintain a seal up to the rated 250 psi during continuous operation at 70 F. The locking arm prevents accidental uncoupling under vibration or pressure cycling.

Highlights

  • Aluminium body resists corrosion for long service life
  • Type C design mates securely with male hose shank
  • 250 psi working pressure handles demanding fluid transfer
  • Nitrile gasket provides reliable seal across temperature range
  • Locking arm included for quick, tool-free connection

Specifications

BrandZORO SELECT

Questions about this item

What hose inside diameter does the 2 in Type C coupler accept?

The coupler is sized for a 2 in hose I.D. and uses a male hose shank connection for a secure fit.

How is the coupler locked onto the hose shank during installation?

Insert the hose shank fully, then flip the included locking arm over the cam groove until it snaps into place; skipping the arm leaves the joint unsecured.

When should the nitrile gasket be inspected or replaced?

Check the gasket at each disconnect for cracks or hardening; replace it whenever it no longer seats cleanly or after any pressure test above 250 psi at 70 F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.