We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium female cam and groove coupler, Type D, 1 in NPT thread, silver finish, locking arm visible

Value Brand

Value Brand Cam and Groove Coupler Female Type D 1 in

SKU CH-54FY-NCA9Q

Aluminium cam-and-groove coupler with NPT threads, nitrile gasket and locking arm rated to 250 psi at 70 F

  • Aluminium body resists corrosion during fluid transfer
  • Female Type D design accepts 1 in male adapters
  • Nitrile gasket seals up to 250 psi at 70 °F
  • Locking arms included for secure, tool-free connections
  • NPT threads match 1 in – 11-1/2 pipe standard

Female Type D Coupler for 1 in NPT Lines

This aluminum cam-and-groove coupler accepts a 1 in male adapter and threads onto a 1 in -11-1/2 NPT pipe or hose end. It suits fluid-transfer systems that need quick, tool-free connections rated to 250 psi at 70 F. The built-in locking arm secures the joint against vibration.

Verify thread standard and pressure rating

Confirm the mating component uses 1 in -11-1/2 NPT threads so the seal engages fully. Ensure the system operating pressure stays at or below the 250 psi limit at 70 F. Check that the nitrile gasket is compatible with the fluid being conveyed before installation.

Aluminum body with nitrile seal and locking arm

The aluminum socket measures 1 15/32 in inside diameter and 2 1/2 in overall length, keeping the assembly compact in tight pipe runs. The integrated locking arm snaps over the adapter groove to prevent accidental uncoupling during pressure spikes. Nitrile gasket material resists common oils and water-based fluids.

Highlights

  • Aluminium body resists corrosion during fluid transfer
  • Female Type D design accepts 1 in male adapters
  • Nitrile gasket seals up to 250 psi at 70 °F
  • Locking arms included for secure, tool-free connections
  • NPT threads match 1 in – 11-1/2 pipe standard

Specifications

BrandZORO SELECT

Questions about this item

Does the Value Brand Cam and Groove Coupler come with a gasket or do I need to buy one separately?

The coupler includes a nitrile gasket and a locking arm, so no separate gasket purchase is required for installation.

Should I choose the 1 in NPT thread version or a different thread size for this Type D coupler?

This model is supplied with a 1 in -11-1/2 NPT thread; select it when your piping uses the same 1 in NPT specification.

What does the 250 psi rating at 70 F mean for daily use in a workshop air line?

It indicates the maximum working pressure at 70 °F; at higher temperatures the allowable pressure will be lower, so stay below 250 psi in normal operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.