We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium cam-and-groove Type F adapter, 2 in coupler, male NPT threads

Value Brand

Value Brand Cam and Groove Adapter Type F 2 in Coupler Size 2 in MNPT

SKU CH-KAS3-66GQS

Aluminium Type F cam-and-groove adapter with 2 in MNPT thread, rated to 250 psi at 70 °F

  • Aluminium body resists corrosion for long service life
  • Type F design mates with standard cam-and-groove couplers
  • 2 in NPT male thread connects directly to pipework
  • Rated 250 psi at 70 °F for high-pressure lines
  • Prop 65 warning alerts installers to regulated chemicals

ZORO SELECT Type F Cam Adapter

This ZORO SELECT Type F cam and groove adapter provides a 2 in coupler size with a 2 in MNPT male thread connection. The aluminum body handles a maximum working pressure of 250 psi at 70 F. Overall length measures 3 3/8 in with a plug outside diameter of 2 1/2 in and a plug length of 1 7/8 in.

Suits 2 in NPT aluminum quick-connect lines

This fitting suits installers joining 2 in hose or pipe to a male NPT thread using a cam-and-groove Type F profile. It is not for systems requiring a locking arm, different thread standards, higher pressure ratings, or alternative body materials such as stainless steel or polypropylene.

250 psi working pressure at 70 F

The 250 psi rating at 70 F is the single specification that determines whether this adapter matches the system design pressure. Verify the operating pressure and temperature against this limit before installation.

Highlights

  • Aluminium body resists corrosion for long service life
  • Type F design mates with standard cam-and-groove couplers
  • 2 in NPT male thread connects directly to pipework
  • Rated 250 psi at 70 °F for high-pressure lines
  • Prop 65 warning alerts installers to regulated chemicals

Specifications

BrandZORO SELECT

Questions about this item

What does the 250 psi working pressure mean when this adapter is installed in a plumbing system?

The 250 psi rating at 70 °F is the maximum pressure the aluminum body can handle continuously; system pressure must stay at or below this value to avoid leaks or deformation.

How does the 2 in MNPT thread size limit what this adapter connects to?

The 2 in MNPT male thread mates only with a matching 2 in FNPT female port, so the adapter cannot be used on smaller or larger pipe threads without a reducer.

What clearance is needed to fit the 3 3/8 in overall length and 2 1/2 in plug diameter?

Allow at least 3 3/8 in of straight pipe run for the adapter body and enough radial space around the 2 1/2 in plug diameter for a wrench to engage during installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.