We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium cam-and-groove Type E adapter with 1-1/2 inch hose shank

Value Brand

Value Brand Cam and Groove Adapter 1-1/2" Aluminum Type E

SKU CH-8NS0-7NHXF

Aluminium cam-and-groove Type E adapter connects 1-1/2 inch hose at up to 250 psi working pressure

  • Aluminum body resists corrosion during fluid transfer
  • Type E male plug fits 1-1/2 inch hose shank connections
  • Rated for 250 psi maximum working pressure at 70 F
  • No locking arm simplifies quick connect and disconnect
  • California Proposition 65 warnings apply for chemical exposure

Product Identity

The Value Brand cam-and-groove adapter is a 1-1/2 inch aluminum Type E fitting designed to connect a male hose shank to a matching female coupler in fluid-transfer systems. It suits maintenance crews, agricultural operators and industrial technicians who need a quick-disconnect joint rated for up to 250 psi at 70 °F. The plug body measures 2 7/64 inch outside diameter with an overall length of 4 33/64 inch.

Compatibility Check

Verify that the hose inner diameter is exactly 1-1/2 inch so the male shank seats fully and the clamp can secure it without distortion. Confirm the mating coupler is a Type E female of the same nominal size and that system pressure never exceeds the 250 psi rating at 70 °F. Ensure the aluminum body is chemically compatible with the fluid being conveyed and that operating temperature stays within the rated limit.

Suitability

This adapter fits users who require a lightweight, corrosion-resistant quick-connect for water, light oils or compatible chemicals at moderate pressure. It is not intended for buyers who need a locking-arm feature, a different coupling type such as Type A through D or F, a larger or smaller hose size, or a material such as stainless steel or polypropylene for aggressive media or higher temperature service.

Highlights

  • Aluminum body resists corrosion during fluid transfer
  • Type E male plug fits 1-1/2 inch hose shank connections
  • Rated for 250 psi maximum working pressure at 70 F
  • No locking arm simplifies quick connect and disconnect
  • California Proposition 65 warnings apply for chemical exposure

Specifications

BrandZoro Select

Questions about this item

What comes with the 1-1/2 inch aluminum Type E cam and groove adapter?

The adapter body is supplied as a single piece with a male hose shank for 1-1/2 inch hose I.D. and a plug outside diameter of 2 7/64 inches. No locking arms, gaskets, clamps or additional fittings are included.

Should I choose the Type E adapter or a different cam and groove style for my hose?

Select the Type E when you need a male hose shank that inserts directly into 1-1/2 inch I.D. hose and mates with a Type D coupler. Choose Type A, B, C, D, F, DP or DC instead if your system requires a female coupler, male thread, female thread, dust plug or dust cap.

What does the 250 psi rating at 70 °F mean when the adapter is installed?

It indicates the maximum working pressure the aluminum body can handle at that temperature; pressure capacity decreases as fluid temperature rises above 70 °F, so the system must not exceed 250 psi under those conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.