We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bare bronze brazing rods 1/8 inch thick in one-pound pack

Value Brand

Value Brand Brazing Alloy 41R229 1/8 in 1 lb

SKU CH-Q9TD-8VPW9

Low-fuming bronze brazing rod for steel, cast iron and copper, 1/8 in diameter, 36 in length, 1 lb container

  • TypeWelding Supplies
  • Joins steel, cast iron and copper with low-fuming bronze alloy
  • Meets AWS RBCuZn-C classification for consistent brazing quality
  • 1/8 in diameter rods suit standard torch setups
  • Melting range 1,590 °F solidus to 1,630 °F liquidus for controlled flow
  • 71 ksi tensile strength delivers durable joints

Brazing Alloy for Steel, Cast Iron and Copper

This low-fuming bronze rod joins steel, cast iron and copper in a single process. It contains no silver and carries an AWS RBCuZn-C classification. Supplied as bare 1/8 in rods in a 1 lb container.

Sustained heat behaviour

The alloy melts between 1,590 and 1,630 Degrees F and reaches a capacity of 1,750 Degrees F during prolonged heating. A compatible chuck temperature of 1,670 Degrees F supports steady torch work without overheating the rod.

Mechanical strength decides suitability

Tensile strength is 71 ksi and yield strength is 64 ksi, defining the joint load limit for structural brazing. Buyers who need higher strength or silver-bearing alloys should look elsewhere.

Highlights

  • Joins steel, cast iron and copper with low-fuming bronze alloy
  • Meets AWS RBCuZn-C classification for consistent brazing quality
  • 1/8 in diameter rods suit standard torch setups
  • Melting range 1,590 °F solidus to 1,630 °F liquidus for controlled flow
  • 71 ksi tensile strength delivers durable joints

Specifications

BrandWESTWARD
TypeWelding Supplies

Questions about this item

Does the 1/8 in diameter rod produce much fume or heat during long brazing sessions?

The alloy is classed as low-fuming bronze with a solidus of 590 °F and liquidus of 630 °F, so fume and heat output stay moderate during extended use.

What base metals and equipment do I need before I can use this RBCuZn-C rod?

It joins steel, cast iron and copper; you need a torch capable of reaching at least 1,630 °F and a compatible 1/8 in chuck or holder.

Will this 36 in bare rod work with the older oxy-acetylene setup I already own?

Yes — the bare RBCuZn-C rod melts at 1,630 °F, well within the range of standard oxy-acetylene equipment, and requires no special flux coating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.