We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Braided stainless steel hose with brass and plastic fittings, 9 inch length

Value Brand

Value Brand Braided Connector 3/8 Comp x 7/8 BC

SKU CH-2XQM-433EP

A braided water connector with 3/8 inch compression and 7/8 inch ballcock fittings, rated to 125 psi at 70 degrees F and certified to IAPMO and NSF61 standards

  • Braided stainless cover resists wear and corrosion
  • Brass compression fitting seals reliably at 3/8 in
  • Ballcock nut fits standard 7/8 in toilet supply
  • Rated 125 psi at 70 F for safe operation
  • NSF61 and IAPMO listed for potable water use

Product Identity

The ZORO SELECT braided connector is a 9-inch flexible water line with a 3/8-inch compression fitting on one end and a 7/8-inch ballcock nut on the other. It is designed for plumbers and DIY installers connecting supply stops to toilet fill valves or similar fixtures.

Installation Checks

Verify that the supply stop accepts a 3/8-inch compression connection and the fill valve uses a 7/8-inch ballcock thread. Ensure the 2 3/8-inch bend radius fits the available space behind the fixture without kinking the PVC tube. Confirm the system operates within the 40 to 180 degrees Fahrenheit temperature range.

Sustained Load Behaviour

The 304 stainless steel braided cover protects the PVC core during continuous pressure cycles up to 125 psi at 70 degrees Fahrenheit. Brass and polyoxymethylene fittings resist corrosion and scale build-up over long service periods. The assembly meets IAPMO and NSF61 standards for potable water safety.

Highlights

  • Braided stainless cover resists wear and corrosion
  • Brass compression fitting seals reliably at 3/8 in
  • Ballcock nut fits standard 7/8 in toilet supply
  • Rated 125 psi at 70 F for safe operation
  • NSF61 and IAPMO listed for potable water use

Specifications

BrandZORO SELECT

Questions about this item

What fittings and hose are included, and is any extra hardware needed?

The connector comes with a 3/8 inch compression brass fitting on one end and a 7/8 inch ballcock nut fitting in polyoxymethylene on the other, joined by a 9 inch PVC hose wrapped in 304 stainless steel braid. No additional parts are required for a standard installation.

Should I choose a different length or pressure rating for my supply line?

This model is supplied at a fixed 9 inch length with a maximum working pressure of 125 psi at 70 degrees F and an operating range of 40 to 180 degrees F. If your run or pressure needs differ, another length or rating would be required.

How does the 125 psi rating hold up when the water heater cycles between 40 and 180 degrees F?

The 125 psi rating is measured at 70 degrees F; the hose is certified to IAPMO and NSF61 standards across the full 40 to 180 degree F range, so it remains within spec during normal hot and cold cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.