Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00941162BTC
In stock
Value Brand
Value Brand Boiler Drain Valve Quarter Turn 1/2 in
Quarter-turn brass boiler drain valve with 1/2 in male NPT inlet and 3/4 in male GHT outlet, rated to 125 psi and 180 °F
- TypeOther
- Quarter-turn lever gives fast shut-off with 1/4-turn operation
- Brass body rated to 125 psi handles high-pressure systems
- ANSI 61-8 certified for potable water safety
- Male NPT inlet and GHT outlet fit standard plumbing connections
- Withstands 180°F media temperature for hot-water applications
Quarter-turn boiler drain valve
This brass quarter-turn boiler drain valve fits a 1/2 inch NPT male inlet and provides a 3/4 inch GHT male outlet. It is designed for residential and light-commercial plumbing installations that require a compact shut-off point.
Thermal and pressure rating
The valve handles media temperatures up to 180 degrees Fahrenheit and a maximum working pressure of 125 psi. Brass construction and a lever handle allow quick operation without excessive force under normal hot-water conditions.
ANSI 61-8 compliance and Prop 65 notice
Meeting ANSI 61-8 confirms the valve is approved for contact with drinking water. California Proposition 65 warnings indicate the product contains chemicals known to cause cancer and reproductive harm, so installers should follow safe-handling practices.
Highlights
- Quarter-turn lever gives fast shut-off with 1/4-turn operation
- Brass body rated to 125 psi handles high-pressure systems
- ANSI 61-8 certified for potable water safety
- Male NPT inlet and GHT outlet fit standard plumbing connections
- Withstands 180°F media temperature for hot-water applications
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
How do I install the 1/2 in NPT male inlet on this boiler drain valve, and what step is commonly missed?
Thread the 1/2 in NPT male inlet into the matching female fitting using pipe thread sealant, then tighten to 125 psi rating; the step often missed is applying sealant on the male threads before assembly.
What maintenance will the brass ball valve and aluminum lever handle need over time?
Inspect the brass body and ball for mineral buildup or corrosion annually; lubricate the 1/4-turn stem if it stiffens, and replace the lever handle if the aluminum shows cracking or wear.
At what temperature limit does the valve first reach its maximum rating during sustained hot-water use?
The maximum media temperature is 180 degrees F; sustained operation at or above this temperature reaches the valve's rated thermal limit first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
