Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00939753BTC
In stock
Value Brand
Value Brand Bathware 3/4 in NPT Brass Ball Valve 600 psi
A forged brass ball valve with an integrated stainless steel strainer, full-port design, and 600 psi pressure rating for 3/4 inch NPT connections
- TypeOther
- Full-port brass body maintains unrestricted flow
- 600 psi rating handles high-pressure residential systems
- Blowout-proof brass stem prevents stem ejection under pressure
- Integrated stainless-steel strainer catches debris before it reaches fixtures
- EPDM seals and PTFE seats withstand -40 to 400 °F range
Brass Full-Port Ball Valve with Strainer
This 3/4-inch NPT brass ball valve combines a full-port design with an integrated stainless-steel strainer, providing debris filtration and unrestricted flow in residential and light-commercial plumbing systems. The forged brass body and chrome-plated brass ball deliver durability, while EPDM seals and PTFE seats ensure reliable shut-off across a wide temperature range.
Ideal for filtered shut-off points
Installers needing a single component that isolates flow and traps sediment at water-heater inlets, irrigation branches or appliance feeds will appreciate the combined function. Systems that require a separate strainer and valve, or applications demanding a different pipe size or pressure class, should select alternative components.
600 psi CWP rating defines pressure suitability
The valve is rated for 600 psi cold working pressure, which determines whether it meets the design pressure of the intended piping system. Operating pressures above this limit risk leakage or failure, so verify the system maximum before installation.
Highlights
- Full-port brass body maintains unrestricted flow
- 600 psi rating handles high-pressure residential systems
- Blowout-proof brass stem prevents stem ejection under pressure
- Integrated stainless-steel strainer catches debris before it reaches fixtures
- EPDM seals and PTFE seats withstand -40 to 400 °F range
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
Will the EPDM seals or PTFE seats need replacement after long service?
The valve uses EPDM seals and PTFE seats rated for a temperature range of -40 to 400 degrees F; replacement timing depends on water quality and cycling frequency.
What pressure limit governs continuous daily operation?
The maximum working pressure is 600 psi CWP, which is the primary limit for sustained use in a plumbing system.
Does the brass body or zinc handle become hot when the valve runs at high temperature all day?
At the upper rating of 400 degrees F the forged brass body and zinc butterfly handle will become very hot; insulation or protective guards are advisable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
