Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00934777BTC
In stock
Value Brand
Value Brand BA-480B 100 Manual 2-Way Ball Valve Press Brass
A manual two-way brass ball valve with a full-port design and lever handle rated for 200 psi water service
- TypeOther
- Full-port design ensures unrestricted water flow
- Locking lever handle prevents accidental operation
- Brass body with chrome-plated ball resists corrosion
- Rated for 200 psi operating pressure
- Vacuum service rated to 29.92 in Hg
Product Identity
This manual two-way ball valve features a brass body with a chrome-plated brass ball and a full port design. The straight body style uses a two-piece construction and includes a locking lever handle. It is intended for water media applications.
Suitable Installations
Installers needing a quarter-turn shut-off with a locking handle for water lines up to 200 psi will find this valve appropriate. It is not suited for systems requiring a 3-A sanitary rating or for service with steam or combustible gas. Buyers who need a vacuum rating beyond 29.92 in Hg should select a different model.
Deciding Specification
The nominal valve size is 1 in and the connection method is press, which determines compatibility with the piping system. The maximum operating pressure is 200 psi for water service. The vacuum service rating reaches 29.92 in Hg.
Highlights
- Full-port design ensures unrestricted water flow
- Locking lever handle prevents accidental operation
- Brass body with chrome-plated ball resists corrosion
- Rated for 200 psi operating pressure
- Vacuum service rated to 29.92 in Hg
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
What pipe size and press tool do I need to install this 1 in full-port ball valve?
The valve has a 1 in nominal size and press-end connections; you must already own 1 in copper or stainless press pipe and a compatible press tool with the correct jaw for that diameter.
Can I keep my existing threaded fittings when adding this valve to the line?
No, the BA-480B uses press ends only, so any threaded adapters or unions already in the system must be removed or replaced with press-compatible fittings before installation.
How can I verify the valve is operating correctly after pressing it onto the pipe?
Pressurise the line up to 200 psi with water, cycle the locking lever from fully open to fully closed, and confirm there is no leakage at the press joints or through the ball when the handle is in the closed position.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
