Value Brand
Value Brand Analog Panel Thermometer 30-240F 3.5in .4in Probe 5ft Cable 12U627
Measures 30 to 240°F with a .4 in copper probe, 5 ft cable, and 3.5 in stainless steel dial
- TypeEnvironmental & Mechanical
- Wide 30-240°F range covers diverse heating tasks
- 5 in dial gives clear at-a-glance readings
- .4 in copper probe fits tight process ports
- 5 ft cable allows remote panel mounting
- 304 stainless housing resists corrosion in harsh environments
Panel Thermometer 30-240F
The Value Brand analog panel thermometer reads temperatures from 30 to 240 degrees Fahrenheit. A 3.5 inch dial with a polycarbonate lens mounts in a panel cutout. The vapor-actuated mechanism uses a 0.4 inch diameter copper probe that extends two inches into the process. A five foot capillary cable connects the probe to the 304 stainless steel housing.
Industrial Maintenance and Process Monitoring
This thermometer suits technicians who need a local, power-free temperature indication on tanks, pipes or HVAC equipment. The half inch MNPT fitting threads directly into standard process connections. Operators who require digital logging, alarm contacts or a programmable transmitter should select an electronic instrument instead.
Panel Mount with Remote Probe
The gauge installs in a panel opening while the probe reaches the measurement point up to five feet away. The copper bulb and capillary tube contain the vapor charge that drives the pointer. The stainless case resists corrosion in wash-down environments. No external power supply or signal wiring is required for operation.
Highlights
- Wide 30-240°F range covers diverse heating tasks
- 5 in dial gives clear at-a-glance readings
- .4 in copper probe fits tight process ports
- 5 ft cable allows remote panel mounting
- 304 stainless housing resists corrosion in harsh environments
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Environmental & Mechanical |
Questions about this item
What panel cut-out size do I need for the 3.5 in dial to fit?
The thermometer dial measures 3.5 in diameter, so the panel cut-out must match that size for a secure mount.
Will the 1/2 in MNPT probe thread into the same port as my old 1/2 in NPT sensor?
Yes, the probe uses a 1/2 in MNPT connection, which matches standard 1/2 in NPT ports on existing equipment.
How can I confirm the vapor-actuated movement is reading correctly after installation?
Compare the needle position against a known temperature reference within the 30 to 240 Degrees F range; the pointer should settle at the corresponding mark on the 3.5 in scale.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
