We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS 90-degree street elbow hub and spigot fitting

Value Brand

Value Brand 90° Street Elbow 4 in Hub x Spigot

SKU CH-VD0N-BG0A2

ABS Schedule 40 street elbow turns 90 degrees with 4 inch hub and spigot connections for gravity-flow drainage systems

  • 90° turn redirects flow in tight spaces
  • ABS Schedule 40 material resists corrosion and impact
  • Hub and spigot ends join without extra couplings
  • Rated for gravity-flow systems up to 140 °F
  • Operates reliably from -20 °F to 140 °F

4-inch ABS Street Elbow

This 90-degree street elbow connects a 4-inch hub to a spigot in gravity-flow plumbing systems. It is made from ABS material rated for Schedule 40 pipe. The fitting suits installers who need a compact directional change in drainage or vent lines.

Suited for gravity drainage and venting

The elbow handles temperatures from -20 to 140 degrees Fahrenheit and carries a gravity-flow pressure rating. It is not intended for pressurised supply lines or hot-water distribution. Buyers who need a pressurised fitting or a different pipe diameter should look at other options.

Simple solvent-weld installation

The spigot end inserts into a 4-inch hub and the socket end accepts a 4-inch pipe, both joined with standard ABS cement. No seal is included in the package. The most common error is forgetting to prime and cement both joints, which causes leaks at the connection points.

Highlights

  • 90° turn redirects flow in tight spaces
  • ABS Schedule 40 material resists corrosion and impact
  • Hub and spigot ends join without extra couplings
  • Rated for gravity-flow systems up to 140 °F
  • Operates reliably from -20 °F to 140 °F

Specifications

BrandZORO SELECT

Questions about this item

Does this ABS street elbow require solvent cement to join to 4 in Schedule 40 pipe?

Yes, the hub socket and spigot end are sized for 4 in Schedule 40 ABS pipe and must be solvent-welded; no seal is included.

Can I connect this fitting directly to an existing 4 in ABS drain line without an adapter?

The spigot end fits inside a 4 in hub and the socket end accepts a 4 in spigot, so it joins two plain-end Schedule 40 pieces without extra couplings.

How do I confirm the joint is sound after assembly?

After the cement cures, run water through the line and check the 90-degree bend for leaks; the fitting is rated for gravity flow at up to 140 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.