We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised malleable iron 90 degree street elbow with female and male NPT threads

Value Brand

Value Brand 90° Street Elbow 1-1/4" FNPT x MNPT Galvanized

SKU CH-75GA-BZ6X0

Galvanized malleable iron street elbow connects 1-1/4 inch female and male NPT threads at a 90 degree angle for Class 150 plumbing systems

  • 90-degree turn redirects flow in tight plumbing runs
  • Female-to-male NPT threads connect pipe to fitting directly
  • Galvanized malleable iron resists corrosion in water systems
  • Class 150 rating handles standard residential pressure demands
  • Prop 65 warning notes chemical hazard for California buyers

1-1/4" Galvanized Street Elbow

This 90-degree street elbow connects a 1-1/4 inch female NPT thread to a 1-1/4 inch male NPT thread. It is made from malleable iron with a galvanized finish and rated for Class 150 service. The fitting suits plumbing installations requiring a right-angle change in direction between threaded pipe and a female-threaded component.

Threaded installation with sealant

Installation requires applying pipe thread sealant or tape to the male NPT threads before tightening into the female port. The 11 threads per inch on both ends must engage fully to prevent leaks. Over-tightening can crack the malleable iron casting, while under-tightening leaves a spiral leak path.

Verify thread size and pressure class

Confirm the existing system uses 1-1/4 inch NPT threads with 11 threads per inch and requires a Class 150 pressure rating. The galvanized coating contains chemicals listed under California Proposition 65. This elbow is not suitable for systems needing a different thread standard, pressure class, or material compatibility.

Highlights

  • 90-degree turn redirects flow in tight plumbing runs
  • Female-to-male NPT threads connect pipe to fitting directly
  • Galvanized malleable iron resists corrosion in water systems
  • Class 150 rating handles standard residential pressure demands
  • Prop 65 warning notes chemical hazard for California buyers

Specifications

BrandZORO SELECT

Questions about this item

How do I verify the 90° turn seats correctly after threading the 1-1/4" NPT ends?

Check that the male and female NPT threads engage fully with no visible gaps, then pressure-test the joint at the rated Class 150 limit to confirm a leak-free seal.

What comes with the ZORO SELECT 5P825 elbow and what must I supply?

The fitting itself is the only item included; you must provide pipe thread sealant or tape and the mating 1-1/4" NPT pipe or nipple.

Which version of the 1-1/4" galvanized street elbow should I select for a Class 150 system?

Choose the ZORO SELECT 5P825 model, which is built to Class 150 with 90° malleable iron galvanized construction.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.