Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00907765BTC
In stock
Value Brand
Value Brand 90 Degrees Elbow Red Brass 1 1/4
A 90-degree reducing elbow connects 1 1/4 inch and 1 inch female threaded pipes at 200 psi maximum operating pressure
- TypeOther
- 90-degree brass elbow redirects flow in tight spaces
- Class 125 brass body resists corrosion for long service life
- 200 psi rating handles standard residential water pressure
- Reducing female threads connect 1-1/4 in to 1 in pipe
- Prop 65 notice informs installers of regulated substances
Brass reducing elbow for plumbing systems
This 90-degree reducing elbow connects a 1-1/4 inch female threaded pipe to a 1 inch female threaded pipe. The brass construction provides corrosion resistance for water supply lines. It is rated for a maximum operating pressure of 200 psi and meets Class 125 specifications. Suitable for residential and commercial plumbing installations.
Ideal for installers joining dissimilar pipe sizes
The reducing design suits projects where a 1-1/4 inch line must transition to a 1 inch line at a right angle. Installers needing a straight coupling or a same-size 90-degree elbow should select a different fitting. Systems requiring pressure ratings above 200 psi or non-threaded connections will need alternative components.
Simple threaded installation with standard tools
The female threads accept standard NPT pipe ends and seal with thread tape or pipe compound. Over-tightening can crack the brass body, so hand-tight plus one to two turns with a wrench is typical. Ensure both pipe ends are clean and deburred before assembly to prevent leaks at the joint.
Highlights
- 90-degree brass elbow redirects flow in tight spaces
- Class 125 brass body resists corrosion for long service life
- 200 psi rating handles standard residential water pressure
- Reducing female threads connect 1-1/4 in to 1 in pipe
- Prop 65 notice informs installers of regulated substances
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
Does this elbow require 1 1/4 inch and 1 inch female threaded pipes to connect?
Yes, the fitting has a 1 1/4 inch female thread on one end and a 1 inch female thread on the other for direct pipe attachment.
Will the Class 125 rating handle the same 200 psi pressure as my existing brass supply lines?
The elbow is rated for 200 psi maximum operating pressure at Class 125, matching typical brass supply line limits.
How can I confirm the joint is leak-free after threading the pipes into the elbow?
Pressurise the system up to 200 psi and inspect both threaded connections for any water seepage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
