We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron 90 degree street elbow with male and female NPT threads

Value Brand

Value Brand 90 Degree Street Elbow 2-1/2" Pipe

SKU CH-BV79-M2B98

Malleable iron 90-degree street elbow connects 2-1/2 inch NPT male and female threads at Class 150 pressure rating

  • 90-degree turn redirects flow in tight pipe runs
  • Malleable iron construction handles Class 150 pressure rating
  • 2-1/2 inch NPT threads connect male and female ends
  • ZORO SELECT brand specifies fitting for plumbing systems
  • New condition ensures clean threads and full structural integrity

90 Degree Street Elbow 2-1/2 Inch

This malleable iron street elbow provides a 90 degree change of direction in piping systems. It features a 2-1/2 inch female NPT thread on one end and a 2-1/2 inch male NPT thread on the other. The fitting is rated for Class 150 service and suits plumbing installations requiring a tight turn.

Suitable For And Limitations

This fitting suits installers joining male and female NPT threads of the same nominal size in a 90 degree layout. It is not for systems requiring a female-to-female or male-to-male connection. Buyers needing a different angle or a reducing connection must select another fitting type.

Class 150 Pressure Rating

The Class 150 designation indicates the pressure class for this malleable iron fitting. This single specification determines whether the elbow meets the pressure requirements of the intended piping system. Verify the system pressure against this rating before installation.

Highlights

  • 90-degree turn redirects flow in tight pipe runs
  • Malleable iron construction handles Class 150 pressure rating
  • 2-1/2 inch NPT threads connect male and female ends
  • ZORO SELECT brand specifies fitting for plumbing systems
  • New condition ensures clean threads and full structural integrity

Specifications

BrandZORO SELECT

Questions about this item

What does the 90-degree angle do once the elbow is installed in a pipe run?

It changes the flow direction by a quarter turn, letting the line make a sharp corner without bending the pipe itself.

How does the NPT thread standard affect the connection in practice?

The tapered NPT threads seal as they tighten, so the joint becomes leak-resistant without a separate gasket when assembled correctly.

What clearance is needed to fit the 2-1/2 inch street elbow in a tight space?

The male and female NPT ends sit on opposite sides of the 90-degree bend, so you need room for the fitting body plus the length of each threaded engagement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.