We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron 90 degree reducing elbow with threaded ends

Value Brand

Value Brand 90 Degree Reducing Elbow 2" x 1 1/2" Class 150

SKU CH-90YR-68JNX

A 90 degree reducing elbow connects 2 inch and 1 1/2 inch female NPT pipes in Class 150 malleable iron

  • 90-degree turn redirects flow efficiently
  • Reducing design joins 2 in and 1 1/2 in pipes
  • Malleable iron construction resists mechanical stress
  • Class 150 rating suits standard pressure systems
  • Female NPT threads with 11 1/2 TPI ensure secure seal

Zoro Select 90° Reducing Elbow

This malleable iron fitting connects a 2 inch female NPT thread to a 1 1/2 inch female NPT thread at a right angle. It is rated for Class 150 service and suits plumbing installations that require a change in pipe direction and diameter. The part is supplied new and ready for assembly.

Threaded joints and pressure rating

The 11 1/2 threads per inch on each end provide a standard NPT seal when assembled with appropriate tape or compound. Class 150 designation indicates the pressure envelope the fitting is designed to contain in normal plumbing use. Malleable iron construction resists cracking during tightening and routine system vibration.

Sustained system pressure and thermal cycling

Under continuous pressurised service the elbow maintains its seal through temperature fluctuations common in water and steam lines. The material yields slightly rather than fracturing if the joint is stressed by expansion or minor settlement. It is not intended for applications that exceed the Class 150 pressure or temperature limits.

Highlights

  • 90-degree turn redirects flow efficiently
  • Reducing design joins 2 in and 1 1/2 in pipes
  • Malleable iron construction resists mechanical stress
  • Class 150 rating suits standard pressure systems
  • Female NPT threads with 11 1/2 TPI ensure secure seal

Specifications

BrandZORO SELECT

Questions about this item

How do I install the 2-inch NPT 11 1/2 thread end without cross-threading?

Start the 2-inch female NPT 11 1/2 threads by hand for at least three full turns before using a wrench on the malleable iron body; the step people skip is checking thread engagement visually before applying sealant.

Will the malleable iron Class 150 body need replacement due to corrosion?

The malleable iron construction resists typical water-system corrosion; inspect joints annually and replace only if you see visible rust pitting or seepage at the 90-degree bend.

What pressure limit appears first during continuous operation?

The Class 150 rating sets the maximum working pressure; sustained use above that rating will cause leakage at the 1 1/2-inch female NPT 11 1/2 connection before any other failure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.