We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron 90 degree elbow coupling galvanized Class 150 1/4 NPT female threads

Value Brand

Value Brand 90 Degree Elbow Coupling 1/4 NPT Class 150

SKU CH-WG6Z-9M34F

A malleable iron 90-degree elbow with 1/4 NPT female threads on both ends, rated Class 150 for plumbing systems

  • 90-degree elbow redirects pipe runs efficiently
  • Malleable iron construction resists cracking under pressure
  • Galvanized finish protects against corrosion in wet systems
  • Class 150 rating suits standard low-pressure plumbing
  • 1/4-inch NPT female threads connect to common fittings

Product Identity

This is a 90-degree elbow coupling made from malleable iron with a galvanised finish. It carries a Class 150 pressure rating and connects two 1/4 inch female NPT threads. The fitting is suited for general-purpose plumbing installations where a right-angle joint is required.

Build and Connections

The malleable iron body provides mechanical strength for threaded pipe assemblies. Galvanisation adds a protective layer against corrosion in typical water or air lines. Both ends use 1/4 inch female NPT threads, allowing direct connection to matching male pipe nipples or adapters without additional sealants beyond standard thread tape.

Upgrade Context

This coupling replaces a straight connector or a damaged elbow in an existing 1/4 inch NPT system. The change is worthwhile when routing requires a 90-degree turn in a confined space or when the previous fitting shows thread wear or corrosion. It is not suited for applications demanding a higher pressure class or a different thread standard.

Highlights

  • 90-degree elbow redirects pipe runs efficiently
  • Malleable iron construction resists cracking under pressure
  • Galvanized finish protects against corrosion in wet systems
  • Class 150 rating suits standard low-pressure plumbing
  • 1/4-inch NPT female threads connect to common fittings

Specifications

BrandZORO SELECT

Questions about this item

What pressure does the Class 150 rating allow for this 1/4 NPT elbow?

The fitting is manufactured to Class 150, the standard pressure class for malleable iron pipe fittings in this size.

What pipe thread do I need to connect both ends of this elbow?

Both ends have 1/4 inch female NPT threads, so you need male NPT pipe or nipples of the same size.

How do I install this elbow without damaging the galvanised coating?

Apply PTFE tape or pipe dope to the male threads, hand-tighten, then finish with a wrench on the hex flats — do not over-tighten past the point where the joint seals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.