We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron 90 degree elbow with female NPT threads

Value Brand

Value Brand 90 Degree Elbow 1/8" FNPT Malleable Class 150

SKU CH-2G6D-5W6M8

A 90-degree malleable iron elbow connects 1/8-inch female NPT threads at Class 150 pressure rating

  • 90-degree elbow redirects pipe runs efficiently
  • 1/8-inch FNPT threads connect directly to standard fittings
  • Malleable iron construction handles Class 150 pressure ratings
  • Zoro Select brand ensures consistent manufacturing quality
  • New condition guarantees full structural integrity out of the box

90° Malleable Iron Elbow

This 90 degree elbow connects two 1/8 inch female NPT threads in a right-angle configuration. The malleable iron construction provides mechanical strength for plumbing installations. It is rated for Class 150 service pressure. The fitting suits water, air and inert gas lines where a directional change is required.

Replaces Worn or Leaking Threaded Elbows

Install this fitting when an existing 1/8 inch elbow shows corrosion, stripped threads or seepage at the joint. The jump is worth it if the system operates near the Class 150 rating and the original fitting material has degraded. It also serves new assemblies that demand a standard malleable iron elbow rather than a forged steel or brass alternative.

Handles Class 150 Pressure at 1/8 Inch Size

The elbow comfortably handles the rated Class 150 working pressure for the 1/8 inch nominal pipe size. It runs out when system pressure exceeds the Class 150 limit or when the application requires a larger bore, a different thread standard or a material with higher corrosion resistance. The 27 threads per inch NPT pitch matches standard American pipe taps.

Highlights

  • 90-degree elbow redirects pipe runs efficiently
  • 1/8-inch FNPT threads connect directly to standard fittings
  • Malleable iron construction handles Class 150 pressure ratings
  • Zoro Select brand ensures consistent manufacturing quality
  • New condition guarantees full structural integrity out of the box

Specifications

BrandZORO SELECT

Questions about this item

What thread size does the 1/8" FNPT elbow require for a proper fit?

The elbow uses 1/8 inch female NPT threads on both ends, so matching male NPT fittings are needed for a leak-free connection.

How should the malleable iron elbow be threaded to avoid stripping the 27 threads per inch?

Apply PTFE tape or pipe dope to the male threads, hand-tighten, then finish with a wrench no more than one to two turns past hand-tight to prevent galling.

When should a Class 150 malleable iron elbow be inspected or replaced in a piping system?

Inspect annually for corrosion, cracking or thread deformation; replace immediately if leaks appear or if the fitting has been subjected to pressure spikes above its 150 psi rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.