We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS 90-degree vent elbow with hub connections

Value Brand

Value Brand 90 Deg Vent Elbow 2 In Hub Schedule 40

SKU CH-BJHE-RCC5P

ABS 90-degree vent elbow with hub connections for 2-inch Schedule 40 pipe, rated to 180 °F per ASTM D3965 cell class 32222

  • 90-degree turn routes vent lines efficiently
  • Hub-to-hub connection fits 2-inch ABS pipe directly
  • Schedule 40 wall handles pressure demands reliably
  • ABS material resists corrosion from -40 to 180 °F
  • Meets ASTM D3965 cell class 32222 standard

90 Degree Hub Vent Elbow

This ABS fitting redirects airflow or waste flow through a 90-degree turn in a vent system. It connects two 2-inch hub ends for a solvent-weld joint. The material meets ASTM D3965 cell class 32222 and handles temperatures from -40 to 180 degrees F.

Suitable for standard vent installations

Installers working with Schedule 40 ABS pipe in residential or light commercial venting will find this elbow matches the required dimensions and pressure class. It is not intended for pressurised water supply lines or applications exceeding the stated temperature range.

Schedule 40 pressure rating

The fitting conforms to Schedule 40 wall thickness, which determines its pressure capacity for vent and drainage use. Verify that your system design calls for Schedule 40 ABS before selecting this part.

Highlights

  • 90-degree turn routes vent lines efficiently
  • Hub-to-hub connection fits 2-inch ABS pipe directly
  • Schedule 40 wall handles pressure demands reliably
  • ABS material resists corrosion from -40 to 180 °F
  • Meets ASTM D3965 cell class 32222 standard

Specifications

BrandZORO SELECT

Questions about this item

How do I install this 2 in hub vent elbow and what step is often missed?

Clean the hub sockets and pipe ends, apply ABS solvent cement to both surfaces, push the pipes fully into each hub with a slight rotation, then hold the joint until the cement sets.

What maintenance or replacement will this Schedule 40 ABS elbow need later?

The fitting is designed for permanent installation; inspect periodically for cracks or leaks caused by impact, chemical exposure, or temperatures outside the -40 to 180 °F range.

What limit appears first when this vent elbow is under sustained use?

The maximum continuous service temperature is 180 °F; exceeding it can soften the ABS material and reduce joint integrity before any pressure limit is reached.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.