We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS 90-degree long sweep elbow hub fitting schedule 40

Value Brand

Value Brand 90 Deg Long Sweep Elbow 2 In Hub Schedule 40

SKU CH-CEZP-PM47P

ABS pipe fitting connects 2 inch hub-to-hub with a 90 degree long sweep elbow rated to Schedule 40 and ASTM D3965 cell class 32222 for -40 to 180 degrees F

  • 90-degree long sweep reduces flow resistance and turbulence
  • Hub-to-hub solvent-weld connection fits 2-inch ABS pipe directly
  • Schedule 40 wall handles pressure loads in drainage systems
  • ABS material rated from -40 °F to 180 °F for wide temperature range
  • Meets ASTM D3965 cell class 32222 for code compliance

2-Inch Schedule 40 Hub Elbow

This Value Brand 90-degree long sweep elbow connects two-inch ABS pipe using hub-to-hub fittings. The long sweep radius promotes smoother flow and reduces friction loss compared with short-radius alternatives. It meets ASTM D3965 cell class 32222 for material quality. The fitting is rated for continuous service from minus 40 up to 180 degrees Fahrenheit.

Hub Connection Limits

Installers needing solvent-weld hub joints on two-inch ABS drain waste and vent lines will find this elbow a direct fit. Projects requiring threaded, mechanical or flanged connections cannot use this hub-only design. Systems operating above 180 degrees Fahrenheit or outside the listed temperature range need a different material.

ASTM D3965 Cell Class 32222

The cell class 32222 designation confirms the ABS compound meets the minimum physical-property requirements of ASTM D3965. This single specification governs impact resistance, stiffness and long-term hydrostatic strength for Schedule 40 fittings. Verifying that the project specification calls for cell class 32222 ensures the elbow is the correct part.

Highlights

  • 90-degree long sweep reduces flow resistance and turbulence
  • Hub-to-hub solvent-weld connection fits 2-inch ABS pipe directly
  • Schedule 40 wall handles pressure loads in drainage systems
  • ABS material rated from -40 °F to 180 °F for wide temperature range
  • Meets ASTM D3965 cell class 32222 for code compliance

Specifications

BrandMUELLER INDUSTRIES

Questions about this item

What size ABS pipe do I need to join with this 2 in hub fitting?

The fitting accepts 2 in ABS pipe on both hub ends for a solvent-weld connection.

Can I use this Schedule 40 elbow with existing Schedule 40 ABS pipe in my system?

Yes, it matches Schedule 40 dimensions and the ASTM D3965 cell class 32222 used by standard Schedule 40 ABS pipe.

How do I verify the joint is sound after solvent-welding the elbow?

Inspect for a full bead of cement around each hub, allow the recommended cure time, then pressure-test the line up to its rated limit at up to 180 °F.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.