We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black phenolic 9-pole terminal strip, 4.06 inches long, 0.89 inches wide, 0.45 inches high

Value Brand

Value Brand 9-pole terminal strip 15A 300VAC 22-14 AWG

SKU CH-79GG-CPCFM

Nine-pole barrier terminal strip rated 15 A at 300 VAC for 22-14 AWG wiring

  • Engine BrandZORO SELECT
  • Nine poles give multiple connection points in one block
  • Rated for 15 A and 300 V to handle standard control circuits
  • Accepts wire from 22 AWG up to 14 AWG for flexible terminations
  • Phenolic housing resists heat and tracking in industrial environments
  • Compact 4.06 in length fits tight panel layouts

9-pole terminal strip for 15 A circuits

This phenolic barrier strip provides nine poles rated at 15 amps and 300 VAC. It accepts wire from 22 AWG up to 14 AWG across two rows. The compact black housing measures 4.06 inches long by 0.89 inches wide and 0.45 inches high. It suits panel builders wiring power distribution blocks in industrial control cabinets.

Thermals noise and power draw

As a passive connector block the strip generates no audible noise and draws no power of its own. Heat rise depends entirely on the current carried by each pole and the ambient temperature inside the enclosure. Phenolic housing withstands typical industrial operating temperatures without active cooling. Installers should size conductors to keep temperature rise within local code limits.

Bundled accessories and software

No cover, mounting hardware or configuration software is included with the strip. The package contains only the nine-pole phenolic block itself. Users must supply appropriate screws or DIN-rail adapters for mounting and provide their own insulating barriers if required by the installation standard. California Proposition 65 warnings apply to the phenolic material.

Highlights

  • Nine poles give multiple connection points in one block
  • Rated for 15 A and 300 V to handle standard control circuits
  • Accepts wire from 22 AWG up to 14 AWG for flexible terminations
  • Phenolic housing resists heat and tracking in industrial environments
  • Compact 4.06 in length fits tight panel layouts

Specifications

Engine BrandZORO SELECT

Questions about this item

How do I mount the phenolic 9-pole terminal strip and what wiring mistake should I avoid?

Mount the strip using its 4.06 in overall length and 0.89 in width as a drilling template, then secure wires under each barrier screw; the common error is inserting 22 AWG wire without tightening the screw enough to grip the fine strands.

What maintenance will the 15 A 300 VAC terminal strip need over time?

Inspect the phenolic housing for carbon tracking or discolouration after any overload, verify each screw remains tight against vibration, and replace the strip if the black housing shows cracks or the barriers become brittle.

Which limit appears first when the 9-pole strip runs at 15 A continuously?

The 300 VAC insulation rating of the phenolic barrier is the first constraint; sustained 15 A load raises terminal temperature until the material approaches its thermal limit, so derate or add airflow before voltage breakdown occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.