We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Large polyethylene stencil with straight arrow symbol 42 in character height 48 in overall height 0.125 in thick

Value Brand

Value Brand 70470 Straight Arrow Stencil 42 in

SKU CH-XECG-99B38

A 42-inch straight-arrow stencil cut from 0.125-inch polyethylene for heavy-duty marking applications

  • TypeEmergency Exit Signs & Lights Accessories
  • Heavy-duty polyethylene resists wear
  • 42 in arrow height for clear visibility
  • 48 in overall stencil height covers large areas
  • 125 in thickness adds rigidity
  • Single-piece design simplifies marking tasks

Straight Arrow Stencil for Marking

The Value Brand 70470 Straight Arrow Stencil provides a single heavy-duty polyethylene template for painting directional arrows on pavement or floors. Its 42 inch character height makes the symbol clearly visible for traffic guidance, warehouse aisles or emergency egress routes.

Material Handles Repeated Use

Polyethylene construction resists cracking when bent around curbs and withstands contact with solvent-based marking paints. The 0.125 inch thickness keeps the stencil flat during application so paint bleed is minimised without extra weighting.

Large Sheet Covers Wide Arrows

Overall dimensions of 48 inches high by 40 inches wide accommodate a 70 inch tall arrow symbol in one piece, eliminating alignment joints. The sheet is not interlocking, so each arrow requires full placement of the template.

Highlights

  • Heavy-duty polyethylene resists wear
  • 42 in arrow height for clear visibility
  • 48 in overall stencil height covers large areas
  • 125 in thickness adds rigidity
  • Single-piece design simplifies marking tasks

Specifications

TypeEmergency Exit Signs & Lights Accessories
BrandC.H. HANSON

Questions about this item

How do I install the 42 in straight arrow stencil on pavement?

Lay the polyethylene sheet flat, weigh or tape the edges so wind cannot lift it, spray traffic paint through the 70 in by 40 in arrow cutout, then lift straight up before the paint skins over to avoid smudging the 0.125 in thick edges.

What maintenance will the polyethylene stencil need after repeated use?

Rinse solvent-based paint off with mineral spirits while wet, or soak cured paint in a compatible stripper; inspect the 0.125 in thick material for cracks or warping before each job and replace the single piece if the arrow outline distorts.

What limits how many arrows I can spray before the stencil degrades?

The 0.125 in polyethylene thickness absorbs solvent and flexes on rough pavement; after many cycles the arrow edges fray and the 48 in overall height can bow, so retire the stencil when line definition blurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.