Value Brand
Value Brand 6AZU0 Magnetic Relay Switching 120 V Coil
A 120 V coil magnetic relay with DPDT contacts and spade terminals, rated for 12 A at 120 V AC and 6 A at 240 V AC
- DPDT contact form handles two circuits simultaneously
- Silver-alloy and copper contacts resist arcing and wear
- Spade terminals allow quick, tool-free wiring
- 12 A at 120 V AC supports resistive and motor loads
- 50/60 Hz operation suits standard mains frequencies
Switching Relay for Resistive and Motor Loads
The Value Brand 6AZU0 magnetic relay switches single-phase motors, solenoids and resistive loads on 120 V or 240 V AC supplies. A square-base design with DPDT contact form and silver-alloy copper spade terminals provides reliable switching for HVAC and automation circuits.
Installers wiring fan motors.
This relay suits contractors and maintenance engineers who need a 12 A rating at 120 V AC or 6 A at 240 V AC with a 60 A locked-rotor capability. It is not for applications that demand a published horsepower rating or an integrated low-voltage control relay.
120 V AC coil voltage and 12 A full-load current
The coil operates on 120 V AC at 50 or 60 Hz and the contacts carry 12 A at that voltage. These two figures determine whether the relay matches the control circuit and load requirements of the installation.
Highlights
- DPDT contact form handles two circuits simultaneously
- Silver-alloy and copper contacts resist arcing and wear
- Spade terminals allow quick, tool-free wiring
- 12 A at 120 V AC supports resistive and motor loads
- 50/60 Hz operation suits standard mains frequencies
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
Will the 120 V coil relay work with my existing 240 V AC motor that draws 6 A?
Yes, the relay is rated for 6 A full-load current at 240 V AC and 60 A locked-rotor current at 120 V AC, matching typical motor start surges.
How can I confirm the DPDT contacts are switching correctly after wiring the spade terminals?
Apply 120 V AC to the coil and measure continuity across each pole pair; both should change state cleanly at 50/60 Hz without arcing on the silver-alloy contacts.
Does the package include mounting hardware or low-voltage relay modules for the square base?
The relay itself has a square base with spade terminals; no low-voltage relay or mounting brackets are included, so DIN rail clips or screws must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
